
AWE Tread Edition Catback Dual Exhaust for Jeep JT 3.6L - Diamond Black Tips
3015-33101 Features:
The perfect Jeep Gladiator Exhaust does exist, and it’s called AWE’s Tread Edition. Handcrafted from US-made 3” T304L stainless steel, the Tread Edition is a full, straight-through Cat Back configuration for drivers looking for rugged performance and a drone-free, signature exhaust note without sacrificing daily-drivability. The Tread Edition features a bespoke resonator in the mid pipe, followed by AWE’s patented, drone-canceling 180 Technology, right before the rear axle (i.e. where the cabin ends). This combination provides the Gladiator’s 3.6L with a sophisticated, full-bodied soundtrack completely controllable via the throttle. With increased throttle, the Gladiator roars with aggression, but at highway speeds, the cabin is free of any drone, and volume is similar to stock. Tip Options: When it comes to bringing up the rear, drivers have a couple of options. The Tread Edition is offered as a single or dual outlet configuration, each having one 5” double-walled, straight-cut tip per tailpipe outlet. Dual: two tailpipes, two tips, exits right behind driver’s and passenger’s side wheels, under the factory or aftermarket fender flare.Conversion Kits: Convert your Tread Edition into a Trail Edition with the AWE Tread-to-Trail Conversion Kit (SKU: 3815-11067)
- Features AWE’s proprietary, patented drone-canceling solution, 180 Technology®
- Easily convert between Tread and Trail Edition
- Handcrafted from 3” U.S.-made CNC mandrel-bent .065” wall T304L stainless steel
- Dyno-verified max gains of 5 hp and 10 lb-ft of torque at the wheels
- Direct bolt-on for factory-like simplicity, no cutting required
- Less is more: clean, straight-through design maximizes performance
- Dual straight-cut, double-walled tips available in Diamond Black
- Dyno-engineered, trail-proven
- AWE No CEL Guarantee
- Lifetime Warranty on exhaust
- 180 Technology: No
- 50 State Legal: Yes
- Edition: Tread Edition
- Fit Gurantee: Yes
- Material: T304L Stainless Steel
- No CEL Guarantee: Yes
- System Type: Cat Back
- Tip Diameter: 5 in
- Tip Diameter: 127 mm
- Tip Finish: Diamond Black
- Tip Qty: 2
- Tune Required: No
- Valves: No
Emissions Note:
This part is legal for sale or uses on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
The Everyday Exhaust System for Your Jeep
AWE Tread Edition Exhaust Systems directly replace restrictive stock piping with the perfect exhaust tone inside and out for your Jeep. These systems add performance without sacrificing daily drivability and feature a straight-through drone-canceling 180 Technology design, 304 stainless steel tubing with smooth mandrel bends, attractive exhaust tips, and all necessary hardware for direct bolt-on fitment. Available for the Jeep JK, JL, and JT models.

![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)




![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)




![Cut-Off Wheels [3 in. Diameter, Set of 4]](https://www.jegs.com/images/mini_200/500/555/555-m580c.jpg)

