
3025-41392 SwitchPath Cat-Back Exhaust System Fits Jeep Wrangler JL Unlimited Rubicon w/6.4L V8 392 Engine
AWE Exhaust & Tuning 3025-41392 SwitchPath Cat-Back Exhaust System Features:
The AWE No Check Engine Light Guarantee offers peace of mind against the appearance of Check Engine Lights when products are installed properly and used as intended, on vehicles with no additional modifications (with the exception of other AWE products intended to work with the product in question). No problems, no lights. Easy.
- Horsepower: +9 HP
- Torque: +5 ft.-lbs.
- High-tucked design allows for more than 3 in. rear clearance than the factory exhaust
- The use of the factory button and throttle input ensures 100% factory operation with OE, tier 1 valves
- Valved exhaust allows you to switch between moderate and aggressive exhaust tone
- H-pipe with resonance for a powerful, aggressive tone with a minimal rasp
- Four outlets, each with BashGuard protection
- Built for bashing, BashGuard has a .125 in. reinforced stainless steel ring on the outlet
- Locking collars to keep exhaust hangers from moving
- Individual trunk pan heat shielding on the passenger side
- Handcrafted from CNC mandrel-bent, .065 in. wall material sourced from the United States
- Concepted, designed, and manufactured by hand, in-house
- Perfect Fitment - Guaranteed
- No CEL - Guaranteed
- Lifetime Warranty
- 50 State Legal: Yes
- Edition: SwitchPath Edition
- Fit Guarantee: Yes
- Material: T304L Stainless Steel
- No CEL Guarantee: Yes
- System Type: Cat-Back
- Tip Finish: No Tips
- Tip Qty: 0
- Tune Required: No
- Valves: Yes
Unleash Your Exhaust with the Press of a Button
AWE SwitchPath Exhaust Systems are the perfect setup for those who want the best of both worlds. These exhaust systems utilize precisely placed valves to control tone and volume output. With the simple push of a button, this exhaust can go from tame to wild in a matter of seconds. They feature quality 304 stainless steel tubing with smooth mandrel bends and the necessary hardware for direct bolt-in fitment. Available for popular Audi/Volkswagen, Porsche, and Mercedes-Benz applications.

![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)




![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)




![Cut-Off Wheels [3 in. Diameter, Set of 4]](https://www.jegs.com/images/mini_200/500/555/555-m580c.jpg)

