$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

42797 Monster-Ram Intake System for 2007.5-2012 Dodge Ram 2500/3500 6.7L Cummins
InfoVehicle Info Needed
BANKSPART NUMBER: 139-42797

42797 Monster-Ram Intake System for 2007.5-2012 Dodge Ram 2500/3500 6.7L Cummins

$71800
More than 10 available
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Items You Need

Fender Cover with Pocket [23 in. W x 31 1/2 in. L]

JEGS

Fender Cover with Pocket [23 in. W x 31 1/2 in. L]

Part Number : 555-65010
$839$16.99
You Save$8.60
Black RTV, Temperature Resistant up to 625 Degrees F [3.8 oz. Tube]

JEGS

Black RTV, Temperature Resistant up to 625 Degrees F [3.8 oz. Tube]

Part Number : 555-28035
$799$8.99
You Save$1.00
Gasgacinch 8 oz

JEGS

Gasgacinch 8 oz

Part Number : 555-440-B
$1569$17.09
You Save$1.40
Thread Sealing Tape 1/2 in. x 43 ft.

JEGS

Thread Sealing Tape 1/2 in. x 43 ft.

Part Number : 555-75055
$319$3.99
You Save$0.80

Monster-Ram Intake System
  • For 2007.5-2012 Dodge Ram 2500/3500 6.7L Cummins

    Banks 42797 Features:

      The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2007-2012 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank's High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF. Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications. The complete system Bank's High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path. How it was designed Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. Expandable With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition. Beats the competition Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

  • Part TypeIntake Manifold
    BrandBANKS
    Package Height11.0
    Package Width13.0
    Package Length24.0
    Weight15.0 PG
    Part CategoryPerformance Parts
    Part FitmentDirect Fit
    Vendor Part Number42797
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning