BD Diesel 1032130 Features:

2- in. OD tube with QA1 3/4- in. heavy duty American 28,000 lbs rod ends. Prevents wheel hop, axle wrap and large angles on U-joints. No adjustment is needed when pulling or hauling. Designed for trucks ranging from a 6- in. lift all the way to a 2- in. drop. Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs. Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars. All necessary hardware and Rivet-nut specific drill bit and tool included. 54- in. eye-to-eye length.

A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.

• Automatically Resets After Shut Down
• Can Be Installed In Less Than 1.5 Hours
• Does Not Set ECM Trouble Codes
• Easily Removed For Truck Lease Returns
• Factory Plug In Connections And Wiring Harness
• Only The Switch Needs A Tool To Install
• Over Speed Shut Down Control Utilizing Built In Intake Air Valve
• Safely Shuts Your Engine Down If Over Speeding
• Save 3 Hours Installation Time Labor Over Mechanical Systems
• Engine: Duramax 6.6L 07.5-10 LMM
• Make: Chevy/GM