
Rear Upper Control Arm Bushing 2010-14 Chevy Camaro
BMR FABRICTION INC BK039H Features:
Reduce spindle movement and dynamic rear alignment changes with a Delrin upper control arm bushing from BMR Suspension. The factory upper A-arm has a bearing at the front of the A-arm and a large rubber bushing at the rear, which allows for a large amount of unwanted movement. This allows for excess spindle movement, which absorbs power when transferring it to the tires. This counter-rotation leads to uncontrollable wheelhop and inconsistent braking and traction tendencies. Designed for street performance, drag race, and handling applications, BMR's Delrin bushing kit eliminates the large bulky factory bushing by replacing the entire saddle assembly and utilizing Delrin bushings that eliminate the deflection seen in the stock bushings. The saddle is completely TIG-welded, giving you a perfect fit, and the strength to withstand any form of performance driving. BMR's Delrin bushings are also greasable for smooth operation and long life. BMR Suspension's BK039 Differential Busing Kit is available in black with zinc-coated hardware. Installation time is about 2-3 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!Give Your Upper A-Arm The Freedom Of Movement It Needs!
Stabilize the rear spindles and reduce wheelhop in your 2010-2014 Camaro with a set of Delrin Upper Control Arm Bushings from BMR Suspension. Manufactured from Delrin, these bushings eliminate unwanted deflection without significantly increasing noise, vibration, or harmonics. BMR's new Delrin bushing kit eliminates the large bulky bushing by replacing the entire saddle assembly and utilizing much smaller, deflection-resistant Delrin bushings. BMR's bushings are internally fluted with grease passages that are greasable through an external fitting. This provides a bulletproof combination that should be mandatory on any car seeing track duty and highly recommended for any modified street car.
Show More
Features:
- Delrin bushings
- Fully TIG Welded Construction
- Grease Fittings With Internal Grease Passages
- 7075 Aluminum Sleeves

