$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Rear Upper Control Arm Bushing 2010-14 Chevy Camaro
InfoVehicle Info Needed
BMR SUSPENSIONPART NUMBER: 142-BK039R

Rear Upper Control Arm Bushing 2010-14 Chevy Camaro

$11046$129.95You Save$19.49
ShippingShips on 11/24/2026
Lowest PriceLowest Price Guarantee

Rear Upper Control Arm Bushing
  • 2010-14 Chevy Camaro
  • Red Finish

    BMR FABRICTION INC BK039R Features:

    Reduce spindle movement and dynamic rear alignment changes with a Delrin upper control arm bushing from BMR Suspension. The factory upper A-arm has a bearing at the front of the A-arm and a large rubber bushing at the rear, which allows for a large amount of unwanted movement. This allows for excess spindle movement, which absorbs power when transferring it to the tires. This counter-rotation leads to uncontrollable wheelhop and inconsistent braking and traction tendencies. Designed for street performance, drag race, and handling applications, BMR's Delrin bushing kit eliminates the large bulky factory bushing by replacing the entire saddle assembly and utilizing Delrin bushings that eliminate the deflection seen in the stock bushings. The saddle is completely TIG-welded, giving you a perfect fit, and the strength to withstand any form of performance driving. BMR's Delrin bushings are also greasable for smooth operation and long life. BMR Suspension's BK039 Differential Busing Kit is available in black with zinc-coated hardware. Installation time is about 2-3 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!
    • Give Your Upper A-Arm The Freedom Of Movement It Needs!

      Stabilize the rear spindles and reduce wheelhop in your 2010-2014 Camaro with a set of Delrin Upper Control Arm Bushings from BMR Suspension. Manufactured from Delrin, these bushings eliminate unwanted deflection without significantly increasing noise, vibration, or harmonics. BMR's new Delrin bushing kit eliminates the large bulky bushing by replacing the entire saddle assembly and utilizing much smaller, deflection-resistant Delrin bushings. BMR's bushings are internally fluted with grease passages that are greasable through an external fitting. This provides a bulletproof combination that should be mandatory on any car seeing track duty and highly recommended for any modified street car.

      Show More

      Features:

      • Delrin bushings
      • Fully TIG Welded Construction
      • Grease Fittings With Internal Grease Passages
      • 7075 Aluminum Sleeves
      Part TypeControl Arm Bushing
      Product LineBMR Suspension Camaro Rear Upper Control Arm Bushing Kits
      BrandBMR SUSPENSION
      Package Height3.8
      Package Width6.5
      Package Length10.2
      Weight3.15 PG
      Part CategoryPerformance Parts
      Part FitmentDirect Fit
      Vendor Part NumberBK039R
      Package Qty1
      Package TypeEA
      No Questions
      No Reviews

      ITEM YOU MAY ALSO CONSIDER

      No-Hop Rear Upper Control Arm Bushings Fits 2010-14 Camaro

      JEGS

      No-Hop Rear Upper Control Arm Bushings Fits 2010-14 Camaro

      Part Number : 555-64580
      $22519$247.99
      You Save$22.80
      Rear Upper Control Arm Bushing 2010-14 Chevy Camaro

      BMR SUSPENSION

      Rear Upper Control Arm Bushing 2010-14 Chevy Camaro

      Part Number : 142-BK039H
      $11046$129.95
      You Save$19.49
      Some parts are not legal for use in California or other states with similar laws / regulations
      p65 warning