Made in USA
Rear-Section Exhaust System 2008-13 BMW M3 Coupe/Convertible 4.0L V8
Product Discontinued
BORLAPART NUMBER: 157-11764

Rear-Section Exhaust System 2008-13 BMW M3 Coupe/Convertible 4.0L V8

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

BMW Rear-Section Exhaust Systems
Rear-Section Exhaust System
  • 2008-13 BMW M3 Coupe/Convertible 4.0L V8
  • Dual Rear Exit
  • Dual Round Rolled Angled Tips
  • "S-Type" Mufflers

    • Made From High Quality Austenitic Stainless Steel
    • Mandrel Bent Pipes
    • Ensures Consistent Diameter Through Each Curve
    • Mufflers Have No Baffles/Chambers
    • Produces High Velocity
    • Million Mile Warranty

    • Under Pressure...
      Millions of exhaust systems are replaced every year due to corrosion and poor performance. Automotive exhaust gas attacks the system from the inside while vibration, chemicals, road salt, and other harsh conditions attack from the outside. When you think about all the stress your exhaust system goes through, it's easy to see why you need a Borla stainless steel system!

      Built to Last...
      Borla builds their exhaust systems from 100% T-304 aircraft-quality stainless steel (not mild steel, aluminum, or coated aluminum). While coating substandard materials like mild steel may prolong life, these coatings suffer and typically fail at the weld points. Stainless steel maintains form and function at all points for superior corrosion protection. As Borla employees say, ''When you compare coated materials to 100% T-304 stainless steel, it's like comparing gold-plated metal to solid gold!''

      Worth Its Weight in Gold...
      Borla's world-class build quality and performance gains are considered by many to be an outstanding investment. And Borla's One Million Mile Warranty is proof that they take their products very seriously.

      Available in Cat-Back and Rear Section Kits...
      Cat-Back System- Comes with the necessary muffler inlet pipes, mufflers, tail pipes and exhaust tips.
      Rear Section- Comes with mufflers, exhaust tips and necessary mounting hardware.

    • ATAK Mufflers - Acoustically Tuned Applied Kinetics, deliver the highest, super aggressive, available dB (decibel) levels in the BORLA street exhaust lineup.
    • S-Type Mufflers - Straight Through Power, delivers the intoxicating, aggressive, Borla's “Sound of Power”.
    • Touring Mufflers - High Performance Without The Roar, delivers a sound that is deep andthroaty, but just slightly louder than stock at open throttle.
    Part TypeExhaust System
    Product LineBorla Luxury Car Exhaust Systems
    BrandBORLA
    Package Height13.0
    Package Width21.0
    Package Length65.0
    Weight65.1 PG
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Tailpipe Diameter (In.)2
    Exhaust Tip FinishPolished T-304 Stainless Steel
    Tip Diameter3.5 in.
    Exit PositionSplit Rear
    Tip CutSlant
    Muffler FinishNatural
    Exit LocationSplit Rear
    Muffler StyleTurbo
    Inlet QuantityTwo
    Tip Outlet Size3.5 in (88.9 mm)
    Outlet Outside Diameter3.500 in.
    Muffler MaterialStainless steel
    ConstructionAll Welded
    Tip IncludedYes
    Pipe Diameter2.750 in.
    System TypeAxle Back
    QuantitySold as a kit
    MaterialT-304 Stainless Steel
    System FinishNatural
    Muffler IncludedYes
    Muffler QuantityTwo
    System StyleRear axle-back
    Off Road Use OnlyNo
    Muffler ConfigurationSingle inlet/Dual outlet
    Inlet Inside Diameter3.500 in.
    System MaterialStainless steel
    Exit QuantityTwo
    Exhaust Pipe MaterialStainless Steel
    Tubing Diameter2.750 in.
    Tip MaterialStainless steel
    Tip Edge StyleRolled edge
    Tip QuantityQuad
    Tip ShapeRound
    Intermediate Pipe Diameter2.75 in (69.85 mm)
    Part FitmentDirect Fit
    Exhaust TypeAxle-Back System
    Vendor Part Number11764
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    3 Inch Exhaust Butt Joint Clamp

    JEGS

    3 Inch Exhaust Butt Joint Clamp

    Part Number : 555-30853
    $1199$12.89
    You Save$0.90
    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    JEGS

    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    Part Number : 555-30802
    $1799$19.99
    You Save$2.00
    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    JEGS

    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    Part Number : 555-30722
    $969$10.99
    You Save$1.30
    Band Clamp Diameter: 2-1/2"

    BORLA

    Band Clamp Diameter: 2-1/2"

    Part Number : 157-18004
    $3499
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!