Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCHASSIS ENGINEERING INC.PART NUMBER: 141-CP-2101GLS
CP-2101GLS 1935-1940 Ford LS Engine Mounting Kit For Use With Weld-On IFS Only
$13900
Ships on 09/11/2026
Lowest Price GuaranteeFord
- 1935-1940 Ford LS Engine Mounting Kit
- For Use With Weld-On IFS Only
Chassis Engineering CP-2101GLS Features:
CP-2101GLS Chevy LS Engine Mounting Kit for 1935-1940 Ford (weld-on)
Engine Mounting Kit to fit Chevy LS into 1935-1940 Ford car and pick-up. Chassis Engineering engine side mounts eliminate frame breakage caused by the "wedge action" of stock type Chevy mounts. This kit is generally used with P/M IFS and boxed frame.
Includes:
- Weld on frame adapters
- Chassis Engineering engine side mounts
- Thru bolt cushion set
- Hardware & instructions
Installation Instructions for Chevy LS Engine Swap Kit for 1935-1940 Ford Car and Pickup Truck using weld-in IFS front crossmember
Note: Even though this kit is intended for weld-in independent front end suspensions, it will also work with any swap that uses boxing plates. Boxing-plate setups require weld-in engine mounts.
1. Install any new crossmember in frame. We recommend using 3/16" boxing plates.
2. Frame adapters may need some fitting in order to match the dimensions. Due to numerous variables coming into play involving boxing plates installation, there is no sure fit out of the box possible with frame adapters.
3. Make sure the mounts are straight and level and precisely 19" center to center. Tack in place, then double-check measurements before finalizing the weld.
4. Bolt engine mounts to block and install engine. Install cushion set
5. The car can now use matching Chassis Engineering components such as transmission mount kits, without modifications.
Part TypeEngine Mount
BrandCHASSIS ENGINEERING INC.
Package Height6.0
Package Width6.0
Package Length12.0
Weight9.0 PG
Part CategoryPerformance Parts
Part FitmentSemi Universal
Vendor Part NumberCP-2101GLS
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]](https://www.jegs.com/images/mini_200/500/555/555-81044k.jpg)
JEGS
1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]
Part Number : 555-81044K
$23698
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
JEGS
1/2 in. Drive Digital Torque Wrench for Fastener Tightening and Disassembly Torque Detection
Part Number : 555-81694
$17599
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
JEGS
Part Number : 555-81044K
$23698
Some parts are not legal for use in California or other states with similar laws / regulations
