Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCP-2203 1935-1940 Ford Small Block Ford V8 Engine Mounting Kit
Ships on 09/10/2026
Lowest Price Guarantee- 1935-1940 Ford Small Block Ford V8 Engine Mounting Kit
- Bolt on frame adapters
- Chassiss Engineering side mounts
- Frame corner braces
- Thru bolt cushion set
- Hardware
- Instructions
- Easy installation
Chassis Engineering CP-2203 Features:
CP-2203 Small Block Ford V8 Engine Mounting kit for 1935-1940 Ford
This kit fits 1965-up small block Ford V8 into 1935-1940 solid axle Ford car or pick up.
This kit includes:
Installation Instructions for CP-2203 Ford Small Block V8 (1965 ) Engine Swap Kit for 1935-1940 Ford Car using original front crossmember.
1. Install frame corner reinforcements between lower frame rail and crossmember flange as shown. Space level with washers. Can also be welded in. Caution: do not omit!
2. Install transmission kit as per instructions included with the kit.
3. Remove original steering mount from frame by drilling out rivets and breaking spot welds.
4. Install steering adapter (if used). Follow instructions included with the adapter.
5. Place straight-edge laid even with the top front of the frame to locate the mounts locations. Install frame adapters.
Clamp in place and drill mounting holes. Drill bottom holes through frame and adapters. Make sure adapters are straight and level and positioned correctly before drilling.
Follow this sequence when installing mounting kit:
1. Install transmission mount.
2. Locate engine mounts and clamp in place.
3. Locate steering adapter position and drill holes.
4. Install engine mounts and lift engine into place.
5. Check L.H. manifold and clearance steering gear as necessary (see steering adapter instructions).
Special Instructions:
1. Engine must be equiped with a Bronco type oil pan or the original must be cut to clear.
2. L.H. exhaust manifold is a 1970-74 Bronco unit. Part #455 for salvage yard reference.
3. Check for clearance between oil pan and tie rod.
Chassis Engineering Engine Mounts For Street Rod, Hot Rod, And Custom Motor Installations
Chassis Engineering Engine Mounts are designed to provide secure, reliable engine placement for classic car restorations, hot rod projects, and custom street rod builds. Built for popular GM, Ford, and Mopar engine applications, these precision-crafted mounts help ensure proper drivetrain alignment, reduced vibration, and dependable chassis support during high-performance driving. Manufactured from durable steel for long-lasting strength and easy installation, Chassis Engineering motor mounts are a trusted choice for engine swap enthusiasts seeking quality aftermarket mounting solutions and professional-level fitment.
Items You Need
![1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]](https://www.jegs.com/images/mini_200/500/555/555-81044k.jpg)
JEGS
1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]
Part Number : 555-81044K
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
JEGS
1/2 in. Drive Digital Torque Wrench for Fastener Tightening and Disassembly Torque Detection
Part Number : 555-81694
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
JEGS
Part Number : 555-81044K
