Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCHASSIS ENGINEERING INC.PART NUMBER: 141-CP-2203G
CP-2203G 1935-1940 Ford Small Block Ford V8 Engine Mounting Weld On Kit
$13900
Ships Tomorrow
Lowest Price GuaranteeFord
- 1935-1940 Ford Small Block Ford V8 Engine Mounting Weld On Kit
- Weld on frame adapters
- Chassis Engineering side mounts
- Bolt cushion set
- Hardware
- Instructions
- Easy installation
Chassis Engineering CP-2203G Features:
CP-2203G Small Block Ford V8 Engine Mounting kit for 1935-1940 Ford (Weld on)
This kit fits 1965-up small block Ford V8 into 1935-1940 Ford car or pick up. Frame needs to be boxed.
This kit includes:
Installation Instructions for CP-2203G Ford Small Block V8 Engine Swap Kit for 1935-1940 Ford Car and Pickup Truck using weld-in IFS front crossmember.
Note: Even though this kit is intended for weld-in IFS, it will also work with any swap that uses boxing plates that require weld-in engine mounts.
1. Install any new crossmembers in frame. We recommend using 3/16" boxing plates.
2. Frame adapters may need fitting due to several variables involved with boxing-plate installation. Use the measurements below to fit the frame adapters:
3. Make sure mounts are straight, level and exactly 20" center to center. Tack in place, then double check all measurements and perform final weld.
4. Bolt engine mounts to block and install engine. Installer is responsible for final fit.
Install cushion set as shown
Part TypeEngine Mount
BrandCHASSIS ENGINEERING INC.
Package Height4.0
Package Width8.0
Package Length12.0
Weight14.0 PG
Part CategoryPerformance Parts
Part FitmentSemi Universal
Vendor Part NumberCP-2203G
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]](https://www.jegs.com/images/mini_200/500/555/555-81044k.jpg)
JEGS
1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]
Part Number : 555-81044K
$23698
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
JEGS
1/2 in. Drive Digital Torque Wrench for Fastener Tightening and Disassembly Torque Detection
Part Number : 555-81694
$17599
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
JEGS
Part Number : 555-81044K
$23698
Some parts are not legal for use in California or other states with similar laws / regulations
