Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCHASSIS ENGINEERING INC.PART NUMBER: 141-CP-2601
CP-2601 1935-1940 Ford Buick V6 Engine Mounting Kit
$22400
Ships on 09/14/2026
Lowest Price GuaranteeFord
- 1935-1940 Ford Buick V6 Engine Mounting Kit
- Bolt on frame adapters
- Chassiss Engineering side mounts
- Bolt cushion set
- Torque brackets
- Hardware
- Instructions
Chassis Engineering CP-2601 Features:
CP-2601 Buick V6 Engine Mounting kit for 1935-1940 Ford
This kit fits Buick & Olds V6 (distributor in front) into 1935-1940 Ford car or pick up.
This kit includes:
Installation Instructions for CP-2601 Buick-Olds V6 Engine Swap Kit for 1935-1940 Forc Car and Pickup Truck. Use with X-member modification and transmission mounting kit from Chevy V8 for 1935-1940 Ford
1. Loosely bolt torque brackets to the frame adapters.
2. Place adapters over frame and position. Clamp into place and recheck dimensions. Drill for 3/8" bolts. Drill the two bottom homes in approximately the same location as the top holes.
3. Torque bracket will lay against front crossmember. Drill through bracket and crossmember, then bolt in place.
4. Install all bolts and tighten. Install Chassis Engineering engine mounts on engine in place of original factory mounts. Install rubber cushion set as shown
5. Install transmission spacer to transmission rubber mount. Spacer moves mount holes back 1 1/2"
6. Install X-member by following directions included with the kit.
7. Transmission and Engine can now be installed and bolted into place.
Note: Oil filter will need an adapter to clear the frame without cutting.
Part TypeEngine Mount
BrandCHASSIS ENGINEERING INC.
Package Height6.0
Package Width6.0
Package Length12.0
Weight20.0 PG
Part CategoryPerformance Parts
Part FitmentSemi Universal
Vendor Part NumberCP-2601
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]](https://www.jegs.com/images/mini_200/500/555/555-81044k.jpg)
JEGS
1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]
Part Number : 555-81044K
$23698
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
JEGS
1/2 in. Drive Digital Torque Wrench for Fastener Tightening and Disassembly Torque Detection
Part Number : 555-81694
$17599
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
JEGS
Part Number : 555-81044K
$23698
Some parts are not legal for use in California or other states with similar laws / regulations
