Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCHASSIS ENGINEERING INC.PART NUMBER: 141-CP-4133
CP-4133 1933-1934 Dodge Small Block Chevy V8 Engine Mounting Kit
$21500
Ships on 09/14/2026
Lowest Price GuaranteeMopar
- 1933-1934 Dodge Small Block Chevy V8 Engine Mounting Kit
- Bolt on frame adapters
- Chassis Engineering side mounts
- Bolt cushion set
- Hardware
- Instructions
- Chevy V8, 1958-up : 283, 302, 307, 327, 350, 400 CI Small Block
- Chevy V6 with the distributor at rear
Chassis Engineering CP-4133 Features:
CP-4133 Small Block Chevy V8 Engine Mounting Kit for 1933-1934 Dodge
This Kit Includes:
Use with pinto mustang IFS.
Engine mounts fit:
Installation Instructions for CP-4133 Chevy Small Block V8 Engine Swap Kit for 1933-1935 Dodge Pickup Truck, 1933 Dodge DP, 1934 Plymouth PD. May fit others, use with IFS, complete interchange not available, steering needs to be changed to use with original axle.
Frame mounts will bolt to a flat area on the frame. If they don't match, you have a frame not covered by this kit.
1. Clamp frame mounts in place as shown. Set engine in place to make sure you have the correct positioning.
2. Drill top holes through flanges. The flat area these mounts sit on may or may not have holes already in the frame. These come in different sizes. Some slotted, and in different locations. Most however are usable as the bottom mounting holes. To mark for drilling, reach inside the frame with a pencil and mark their location on the frame mount. Do this only to the bottom holes on each side. Remove mounts and drill these holes.
3. Reinstall frame mounts and bolt in place. Use bolts that match hole size (because of size differences, bolts are not included with the kit).
4. Bolt Chassis Engineering engine mounts to engine, with the offset extending forward.
5. Install engine using the rubber cushion set, as shown
Part TypeEngine Mount
BrandCHASSIS ENGINEERING INC.
Package Height6.0
Package Width6.0
Package Length12.0
Weight7.0 PG
Part CategoryPerformance Parts
Part FitmentSemi Universal
Vendor Part NumberCP-4133
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]](https://www.jegs.com/images/mini_200/500/555/555-81044k.jpg)
JEGS
1-Ton Automotive Shop Crane [Boom Operating Range: 34 in. to 45 in.]
Part Number : 555-81044K
$23698
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
JEGS
1/2 in. Drive Digital Torque Wrench for Fastener Tightening and Disassembly Torque Detection
Part Number : 555-81694
$17599
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
JEGS
Part Number : 555-81044K
$23698
Some parts are not legal for use in California or other states with similar laws / regulations
