Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Ford
- Ultra-Pro Roller Lifters
- 1969-70 Ford Boss 429 Hemi V8
- .874" Diameter Lifter Bore
- .750" Wheel Diameter
- Set/16
- Crane Ultra-Pro roller lifters are the ultimate in state-of-the-art, drop-in design premium quality roller lifters! Empirical design and development techniques have been usedto eliminate any distortion effects of residual stresses resulting from the heat treat process. Ultra-Pro roller lifters feature maximized strength; especially in the axle support struts. This insures geometrically perfect tracking of the roller wheel. Additionally, super-premium wheels, axles and bearings made from the finest grades of alloy steels are used to conquer even the most violent cam lobe profiles currently designed or anticipated for the next several years! These lifters represent the best combination of lightweight, ultimate strength and reliability. They should be used in all drag race applications with spring seat pressures in excess of 300 lbs., and open pressures over 800 lbs. In addition, they should be used in any short-track circle or endurance racing application where valve spring seat pressures exceed 250 lbs., and open pressures exceed 700 lbs. Use Crane Cams Ultra-Pro series lifters when absolute durability is necessary. With Crane Cams Ultra-Pro roller lifters, engine builders can now be sure that they're using the absolute finest available, professional quality roller lifters for high-stress race engine applications. Count on Crane Cams to give you a full selection of performance products with the best performance for the buck and peace of mind for you.Key Features
- One peice, carburized 8620 steel surfaced-finished bodies
- Heat treated steel vertical locking bars with Crane Cams monel pin & flange assemblies
- Oil pressure fed to the wheel, and bearing focused oiling to the needles and axles
- Standard height pushrod seats
- Designed For 50MM & 60MM Bearing Diameter Camshafts
Part TypeLifter
Product LineCrane Cams Ultra-Pro Large Bearing Diameter Mechanical Roller Lifters
BrandCRANE CAMS
Package Height3.5
Package Width3.5
Package Length8.0
Weight8.0 PG
Vendor Part NumberBBLV-30570-16
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
