Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Ignition System Adapter Harnesses
- Ignition System Adapter Harness
- Six-Pin Ignition & Coil
- 48" Long
- Crane Cams HI-6S is manufactured with a powerful inductive design for street and race performance. It has a Plug-n-Go installation for 4/6/8-cylinder applications. The HI-6S delivers Up to 70% more spark-gap energy than stock ignitions! It is suitable for up to 9.5:1 compression ratio with a max output up to 8,000 RPM. The HI-6S has a new soft urethane encapsulation that seals against moisture, dirt, dust, vibration, and heat. It can be triggered by points or module distributors and has a built-in rev limiter that's adjustable in 100 RPM increments from 3100-9900 RPM.
- Inductive ignition with long duration spark
- Boost retard or 20° selectable nitrous retard
- 50-State Legal CARB EO #225-59Specifications:
- Operating Voltage: 6 to 18 Volts, Reverse Polarity protected, negative ground only
- Current Draw: 5.0 Amps max @ 7,000 RPM
- RPM Operating Range: 8,000 RPM (Can be extended to 10,000 RPM on 4 cyl. engine)
- RPM Limiter Range: 3,100 to 9,900 RPM when digital stage rev limiter mode is selected
- Multiple Spark Duration: 20° crank rotation below 2,000 RPM, Max 12 sparks per sequence
- Primary Voltage Output: 450 Volts
- Spark Duration: 2,800 microseconds at 2,000 RPM
- Trigger Input: Module Trigger (12v square wave)
- Dimensions: 5-1/2'' x 3'' x 1-1/2'', 2-3/8 lbs
Features
Product LineCrane Cams HI-6S Multi-Spark Ignition
BrandCRANE CAMS
Package Height1.0
Package Width8.0
Package Length8.0
Weight0.25 PG
Vendor Part NumberBBLV-6000-6715
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![Industrial Nitrile Gloves [5.5 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1126.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, Medium]
Part Number : 555-1126
$1599$17.99
You Save$2.00
![Industrial Nitrile Gloves [5.5 mils Thick, X-Large]](https://www.jegs.com/images/mini_200/500/555/555-1128.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, X-Large]
Part Number : 555-1128
$1599$17.99
You Save$2.00
![Industrial Nitrile Gloves [5.5 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1127.jpg)
JEGS
Part Number : 555-1126
$1599$17.99
You Save$2.00
JEGS
Part Number : 555-1128
$1599$17.99
You Save$2.00
Some parts are not legal for use in California or other states with similar laws / regulations
