Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededEdelbrock Performer Power Packages
Ships on Sep 08, 2026
Lowest Price Guarantee- Performer Power Package
- Small Block Chevy 262-350ci with 1987-95 Cast Iron Cylinder Heads
- 4-bbl Spread-Bore Carb Flange (non-EGR)
- Idle-5500 rpm
- Designed for street 262-400ci Chevy V8s with 1987-95 cast iron heads with canted center bolt holes.
- Will not fit Bowtie or LT1 heads.
- 1987-95 engines with stock aluminum heads use intake manifold 350-2101.
- This intake is for 302, 327, 350ci V8s with OEM 4-bbl. carb except stock equipped EGR.
- Accepts late-model waterneck, air-conditioning, alternator, H.E.I. and has rear water crossovers. This intake does accept exhaust-heated chokes.
Power Package includes matching:
- Performer Intake Manifold 350-2104
- Edelbrock Performer 600cfm Carburetor 350-1406
- Carburetor Adapter Plate 350-2732
- Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters 350-2102
Installation Notes:
- Port exit dimensions: 1.14' x 1.88'
- Recommended intake gasket: Chevrolet Performance 809-10159409
- Manifold height: (A) 3.50' , (B) 4.60'; Carb pad height = 4.05'
350-8901 - 50-State legal only on vehicles equiped with factory non-EGR.
Carburetor Recommendations:
OEM Rochester Quadrajet 4-bbl. (pre-1981 only)
- carb will work with non-EGR system
- carb has provision for evaporative canister
- carb acceptable to factory cruise control
Edelbrock Performer 600cfm Carburetor 350-1405.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- requires 350-8008 or 350-8024 stud, nut & washer kit
- carb acceptable to factory cruise control
- carb has manual choke only
- use throttle bracket 350-8036 for 1972-78 only
Edelbrock Performer 600cfm Carburetor 350-a>1406.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- carb acceptable to factory cruise control
- use throttle bracket 350-8036 for 1972-78 only
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- requires 350-8008 or 350-8024 stud, nut & washer kit
- carb acceptable to factory cruise control
- carb has manual choke only
- use throttle bracket 350-8036 for 1972-78 only
Edelbrock Thunder Series AVS 650cfm Carburetor 350-1906
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- carb acceptable to factory cruise control
- use throttle bracket 350-8036 for 1972-78 only
Camshaft Specs:
- Designed for optimum torque from the low-end to the mid-range.
- They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
- You can expect a major improvement in throttle response and torque.
Duration Advertised: 280° Intake / 295° Exhaust Duration @ .050' Lift: 204° Intake / 214° Exhaust Valve Lift: .420' Intake / .442' Exhaust Lobe Separation Angle: 112° Open/Close @.050' Cam Lift: Intake - 5° ATDC (opens) / 29° ABDC (closes)
Exhaust - 44° BBDC (opens) / 10° BTDC (closes)Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Intake Manifold, Carburetor and Camshaft Kit
Since founder Vic Edelbrock Sr. began building performance intake manifolds in 1938, Edelbrock has grown into one of the most trusted names in American high-performance parts, from carburetors and intake manifolds to cylinder heads, crate engines, and EFI systems. JEGS has spent decades supplying Edelbrock components to racers, engine builders, and street enthusiasts, backing this extensive lineup with in-house technical support, fast shipping, and a Price Match Guarantee so you can choose proven Edelbrock parts with confidence.
Proven Performance With No Guesswork!
The Edelbrock Performer Power Packages are designed for stock engines and significantly increase performance, fuel economy while lowering exhaust emissions. These packages provide incredible power from idle to 5500 RPM for your daily commute, towing, passing or uphill climbs in your car, truck, van or recreational vehicle. The main components of these packages include intake manifolds, carburetors and camshafts. Edelbrock also offers cylinder heads that match to optimize performance. For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Performer Multi-Point EFI Systems, camshafts and cylinder heads are also available to increase performance even further on GM vehicles originally equipped with throttle body injected V8's.
