
EDELBROCKPART NUMBER: 350-2182
Performer-Plus Camshaft Kit for Small Block Ford 351W
$37495
1 left in stockFord
- Performer-Plus Camshaft Kit
- Ford 351W
- Lift: .448''/.472''
- Duration @ .050: 204°/214°
- Advertised Duration: 270°/280°
- Idle-5500 RPM Range
INSTALLATION NOTES:Duration Advertised 270° Intake/280° Exhaust Duration @ .050' 204° Intake/214° Exhaust Lift @ Valve .448' Intake/.472' Exhaust Lift @ Cam .280' Intake/.295' Exhaust Lobe Separation Angle 112° Intake Centerline 107° Intake Timing @ .050" Open 5° ATDC
Close 29° ABDCExhaust Timing @ .050" Open 44° BBDC
Close 10° BTDCVacuum @ 1000RPM Idle 15" - Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7820 (1965½72-1/2) or 350-7811 (1973½90). Accu-Drive gear drive 350-7892 may also be used.
- Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5882 or 350-5982(rotators).
- Use stock ratio (1.6:1) rocker arms only.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeCamshaft and Lifter Kit
BrandEDELBROCK
Package Height3.9
Package Width7.7
Package Length26.5
Weight14.6 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)214
Cam StyleHydraulic flat tappet
Exh. Duration Advertised (Deg)280
Locks IncludedNo
Engine Make/SizeFord 5.8L/351W
Retainers IncludedNo
Intake Valve Lift With Factory Rocker Arm Ratio (I0.448
Int. Duration @ .050 In. (Deg)204
Assembly Lubricant IncludedYes
Basic Operating Rpm RangeIdle-5,500
Pushrods IncludedNo
Gaskets IncludedNo
Rocker Arms IncludedNo
Intake Valve Lift0.448 in (11.379 mm)
Computer-Controlled CompatibleNo
Int. Duration Advertised (Deg)270
Lobe Separation (Deg)112
Rpm Range0-6750
Lifter StyleHydraulic flat tappet
Advertised Duration270 int./280 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.472
Valve Springs IncludedNo
UsageStreet/Performance
Valve Lift With Factory Rocker Arm Ratio0.448 int./0.472 exh.
QuantitySold as a kit
Valve Stem Seals IncludedNo
Exhaust Valve Lift0.472 in (11.989 mm)
Advertised Intake Duration270
Intake Duration At 050 Inch Lift204
Exhaust Duration At 050 Inch Lift214
Timing Chain And Gears IncludedNo
Advertised Exhaust Duration280
Lifter TypeHydraulic Flat Tappet
Part FitmentSemi Universal
Duration At 050 Inch Lift204 int./214 exh.
Valve Springs RequiredYes
Lifters IncludedYes
Vendor Part Number2182
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations
![Precision Cam Degree Wheel Kit [11 in.]](https://www.jegs.com/images/mini_200/500/555/555-81621.jpg)

![Engine Assembly Lube [4 oz. Bottle]](https://www.jegs.com/images/mini_200/500/555/555-28000.jpg)
![Break-In/Engine Oil Supplement [12 oz. Bottle]](https://www.jegs.com/images/mini_200/500/555/555-28060.jpg)




![Valve Spring Compressor [Stud Mount]](https://www.jegs.com/images/mini_200/500/555/555-80518.jpg)





![Valve Spring Compressor [Stud Mount]](https://www.jegs.com/images/mini_200/500/555/555-80521.jpg)