Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
EDELBROCKPART NUMBER: 350-2730
Torker Olds 455 Intake Manifold
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Items You Need
![Blue RTV, Temperature Resistant up to 500 degrees [3 oz. Tube]](https://www.jegs.com/images/mini_200/500/555/555-28030.jpg)
JEGS
Part Number : 555-28030
$799$8.99
You Save$1.00
![Carburetor Stud Kit [1 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15840.jpg)
![Carburetor Stud Kit [2 in. long]](https://www.jegs.com/images/mini_200/500/555/555-15841.jpg)
![Carburetor Stud Kit [2 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15842.jpg)
![Carburetor Stud Kit [2 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15845.jpg)
![Carburetor Stud Kit [3 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15846.jpg)
![Carburetor Stud Kit [3 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15847.jpg)
Oldsmobile 400-455ci V8
- Big Block Oldsmobile 400-455ci
- 4-bbl Spread-Bore Carb Flange
- 2500-6500 RPM Range
- Satin Finish
Designed for street 400, 425, 455ci Oldsmobile V8's.
Installation Notes: - Port exit dimensions: 1.25" x 2.34"
- Manifold height: (A) 4.50", (B) 5.60"
- Carb pad height: 5.05" Click here to determine carburetor pad height
- Will not fit Toronado or 4-4-2 Ram Air scoop option without hood modifications.
- Manifold not equipped with EGR.
- Recommended Intake Gasket: Edelbrock p/n 350-7284
- HEI will clear
Carb Recommendations - OEM 4-bbl carburetor
- Edelbrock Performer 750cfm Carburetor Manual Choke p/n 350-1407 , Electric Choke p/n 350-1411
- Edelbrock Performer 800cfm Carburetor Manual Choke p/n 350-1412 , Electric Choke p/n 350-1413
- Edelbrock Thunder AVS 800cfm Carburetor Manual Choke p/n 350-1812 , Electric Choke p/n 350-1813
- 2500-6500 RPM Power!
The Edelbrock Torker-II manifold is a single-plane, low-rise design that works well for high-rpm, high-performance street applications. The low profile of a Torker-II intake is ideal for applications where hood clearance is limited. A Torker-II produces gains in top-end horsepower with adequate throttle response. These manifolds are not mileage or emissions related manifolds, they are only for high-performance applications.
Part TypeIntake Manifold
Product LineEdelbrock Torker Manifolds for Olds
BrandEDELBROCK
Package Height7.4
Package Width15.6
Package Length23.4
Weight26.12 PG
Part CategoryPerformance Parts
Engine Block StyleStock/OEM standard Deck
UsageRacing
Number Of CarbsOne
Intake MaterialAluminum
PositionN/A
Intake StyleSingle plane
EmissionWithout EGR
QuantitySold individually
Cylinder Head TypeStandard
Intake FinishNatural
Carburetor QuantityOne
Engine Make/SizeOlds 400-455
Intake Section IncludedComplete
Basic Operating Rpm Range2,500-6,500
EgrWithout EGR
Rpm Range2500-6500
Vendor Part Number2730
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations
){kind=link}