Torker AMC Intake Manifold

Name: Torker AMC Intake Manifold
Brand: EDELBROCK
SKU: 350-2930
Price: 314.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

AMC 343-401ci V8

AMC 360-401ci 1970-1991
4-bbl Square-Bore Carb Flange (non-EGR)
3500-7500 RPM Range
Satin Finish
Designed for street and race 360-390-401 c.i.d. V8 engines.
Manifold not equipped with EGR.
Manifold will not accept stock Motorcraft spread-bore carburetor.
Not recommended for 290 or 304 V8s.
Includes standard oil fill and PCV provisions.
Installation Notes:
Port exit dimensions: 2.15' x 1.04"
Manifold height: (A) 4.45' , (B) 5.38';
Carb pad height = 4.92'
View Manifold 'A/B' Measurement Guide.
Recommended intake gasket; Edelbrock 350-7213 or Fel-Pro 375-MS96011
Must use factory style metal valley tray gasket
Two center bolt holes offset
Bracket p/n 350-8034 required for 1979 and later vehicles.

Carburetor Recommendations:
Edelbrock Performer 750cfm Carburetor Manual Choke p/n 350-1407 , Electric Choke p/n 350-1411
Edelbrock Performer 800cfm Carburetor Manual Choke p/n 350-1412 , Electric Choke p/n 350-1413
Edelbrock Thunder AVS 800cfm Carburetor Manual Choke p/n 350-1812 , Electric Choke p/n 350-1813

2500-6500 RPM Power!

The Edelbrock Torker-II manifold is a single-plane, low-rise design that works well for high-rpm, high-performance street applications. The low profile of a Torker-II intake is ideal for applications where hood clearance is limited. A Torker-II produces gains in top-end horsepower with adequate throttle response. These manifolds are not mileage or emissions related manifolds, they are only for high-performance applications.

Part TypeIntake Manifold

Product LineEdelbrock Torker-II Manifolds for AMC

BrandEDELBROCK

Package Height7.1

Package Width14.7

Package Length24.4

Weight20.45 PG

Part CategoryPerformance Parts

Engine Block StyleStock/OEM standard deck

UsageRacing

Number Of CarbsOne

Intake MaterialAluminum