Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededPerformer Buick V6 Intake Manifold
Ships Today
Lowest Price GuaranteeItems You Need
![Intake Manifold Bolts for Small Block Chevy, Small and Big Block Chrysler and AMC V8 [3/8-16 x 1 in., Hex Head, Zinc]](https://www.jegs.com/images/mini_200/700/720/720-955g.jpg)
![Carburetor Stud Kit [1 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15840.jpg)
![Carburetor Stud Kit [2 in. long]](https://www.jegs.com/images/mini_200/500/555/555-15841.jpg)
![Carburetor Stud Kit [2 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15842.jpg)
![Carburetor Stud Kit [2 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15845.jpg)
![Carburetor Stud Kit [3 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15846.jpg)
![Carburetor Stud Kit [3 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15847.jpg)
![Blue RTV, Temperature Resistant up to 500 degrees [3 oz. Tube]](https://www.jegs.com/images/mini_200/500/555/555-28030.jpg)
- Buick 231/252ci Even Fire 1979-up
- 4-bbl Square-Bore Carb Flange (non-EGR)
- Idle-5500 RPM Range
- Satin Finish
Designed for 1979 and later street 231/252ci (252ci 1980-84 only) Buick V6 engines with late-model cylinder heads. Manifold will not fit pre-1979 engines. Manifold not equipped with EGR. Not compatible with C-3 and C-4 electronic fuel management systems.
Installation Notes: - Port exit dimensions: .80' x 1.85'
- Manifold height: (A) 4.67' , (B) 5.45' (1.30' taller than stock)
- Carb Pad Height: 5.06" p/n 375-1200.
Carburetor Recommendations: - OEM 4-bbl
- Edelbrock Performer 500cfm Carburetor Electric Choke p/n 350-1403 , Manual Chock p/n 350-1404
- Holley 390cfm Carburetor p/n 510-0-8007.
- Must use square-bore to spread-bore carburetor adapter plate for Edelbrock and Holley p/n 350-2732.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Since founder Vic Edelbrock Sr. began building performance intake manifolds in 1938, Edelbrock has grown into one of the most trusted names in American high-performance parts, from carburetors and intake manifolds to cylinder heads, crate engines, and EFI systems. JEGS has spent decades supplying Edelbrock components to racers, engine builders, and street enthusiasts, backing this extensive lineup with in-house technical support, fast shipping, and a Price Match Guarantee so you can choose proven Edelbrock parts with confidence.
Idle-5500 RPM Power!
Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.
Show More
EASY KITS
