![675.500.2000 Conventional 5 in. Rear Spring [600/2000 lb. Rate]](https://www.jegs.com/images/mini_750/300/369/369-0675.5002000.jpg)
EIBACHPART NUMBER: 369-0675.5002000
675.500.2000 Conventional 5 in. Rear Spring [600/2000 lb. Rate]
$9000
2000
Conventional 5 in. Rear SpringRate lbs. in: 600/2000 Diameter 5 in. Length: 6.75 in. Block Height: 3.98 in. Travel: 2.77 in. Block Load lbs: 5547 Weight lbs: 6.96
Eibach 675.500.2000 Conventional 5 in. Rear Spring:
- Maximize traction and stability with this high-quality pull bar spring
- Progressive Rate for optimized vehicle traction
- Outside diameter of 5.00 in.
- Maximum travel in combination with the smallest block height
Progressive Rate for Traction
Eibach Conventional Rear Springs, Pull Bar Springs, and even Coil-Over Springs have maximum travel in combination with the smallest block heights.
Part TypeCoil Spring
Product LineEibach Conventional Rear Springs
BrandEIBACH
Package Height6.4
Package Width6.5
Package Length10.7
Weight8.18 PG
Part CategoryPerformance Parts
PositionRear
Spring FinishRed
QuantitySold individually
Spring TypeCoil
Part FitmentUniversal
Vendor Part Number0675.500.2000
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations

![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)



![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)