New Item Badge
4.11 Ratio Rear Ring and Pinion Gear Set Fits Select Ford Mustang, Lincoln Continental w/Ford 9 in. Rear Axle [8620 Steel]
InfoVehicle Info Needed
EXCELPART NUMBER: 857-F9411

4.11 Ratio Rear Ring and Pinion Gear Set Fits Select Ford Mustang, Lincoln Continental w/Ford 9 in. Rear Axle [8620 Steel]

$17705
ShippingShips on 01/25/2027
Lowest PriceLowest Price Guarantee

Items You Need

2-in-1 Folding Creeper & Z-Seat

JEGS

2-in-1 Folding Creeper & Z-Seat

Part Number : 555-81165
$5519$68.99
You Save$13.80
3-Ton Aluminum Floor Jack [6,000 lbs. Capacity]

JEGS

3-Ton Aluminum Floor Jack [6,000 lbs. Capacity]

Part Number : 555-80077
$22099$285.99
You Save$65.00
6-Ton Jack Stands

JEGS

6-Ton Jack Stands

Part Number : 555-80037
$8099$89.99
You Save$9.00
Breaker Bar [1/2 in. Drive, 30 in. L]

JEGS

Breaker Bar [1/2 in. Drive, 30 in. L]

Part Number : 555-W32126
$3399$40.99
You Save$7.00

4.11 Ratio Rear Ring and Pinion Gear Set
  • 1955-1988 Ford Mustang, F-150, Lincoln Continental, Mark III, Mercury Grand Marquis, Cougar
  • Ford 9 in. Rear Axle
  • 37/9 Ring/Pinion Tooth Count
  • 28-Spline Pinion
  • 8620 Steel Construction
  • Set of 2

    The EXCEL from Richmond F9411 is a 4.11 ratio ring and pinion gear set built for the Ford 9 in. rear axle. Swapping in a different gear ratio is one of the most direct ways to change how a vehicle accelerates, tows, and cruises, and it is also the fix when a worn or chipped set starts to whine or clunk under load. It fits select Ford, Lincoln & Mercury vehicles from 1955 to 1988; the complete vehicle application list appears below. The ring gear is machined from 8620 Steel and the ring and pinion are supplied as a matched set that must be installed together.

    EXCEL from Richmond F9411 Compatibility Notes:

    • Designed for the Ford 9 in. rear axle
    • 4.11:1 final drive gear ratio
    • 37-tooth ring gear paired with a 9-tooth pinion
    • 28-spline pinion shaft accepts the matching pinion yoke
    • Pinion shaft diameter: 1.313 in.
    • Ring gear bolt quantity: 10
    • Fits the Dropout-bolt differential cover housing
    • Ring gear rotation: Standard
    • Ring gear material: 8620 Steel
    • Professional installation is recommended: pinion depth, bearing preload, and backlash must be set and confirmed with a gear marking compound pattern check, followed by a proper gear break-in.

    EXCEL from Richmond F9411 Vehicle Applications:

    • 1966-1986 Ford Bronco
    • 1957-1959 Ford Club
    • 1957, 1969-1974 Ford Country
    • 1969-1974 Ford Country Squire
    • 1969-1983 Ford E-100 Econoline
    • 1975-1983 Ford E-100 Econoline Club Wagon
    • 1975-1988 Ford E-150 Econoline
    • 1975-1988 Ford E-150 Econoline Club Wagon
    • 1969-1974 Ford E-200 Econoline
    • 1975-1980 Ford E-250 Econoline
    • 1975-1980 Ford E-250 Econoline Club Wagon
    • 1975-1976 Ford Elite
    • 1957-1983 Ford F-100
    • 1975-1987 Ford F-150
    • 1957-1970 Ford Fairlane
    • 1960-1970 Ford Falcon
    • 1959-1967 Ford Galaxie
    • 1962-1974 Ford Galaxie 500
    • 1972-1976 Ford Gran Torino
    • 1975-1980 Ford Granada
    • 1965-1979 Ford LTD
    • 1977-1979 Ford LTD II
    • 1970-1977 Ford Maverick
    • 1965-1973 Ford Mustang
    • 1957, 1963-1964 Ford Ranch Wagon
    • 1957-1979 Ford Ranchero
    • 1957-1959 Ford Skyliner
    • 1963-1964 Ford Sprint
    • 1960 Ford Starliner
    • 1957-1959 Ford Sunliner
    • 1955-1979 Ford Thunderbird
    • 1968-1976 Ford Torino
    • 1957-1959 Ford Victoria
    • 1958-1979 Lincoln Continental
    • 1957 Lincoln Mark II
    • 1968-1971 Lincoln Mark III
    • 1977-1980 Lincoln Versailles
    • 1964-1969, 1971-1977 Mercury Comet
    • 1967-1979 Mercury Cougar
    • 1975-1980 Mercury Grand Marquis
    • 1963-1966, 1969-1970 Mercury Marauder
    • 1967-1980 Mercury Marquis
    • 1968-1976 Mercury Montego
    • 1964-1965 Mercury Villager
  • Part TypeRing and Pinion
    BrandEXCEL
    Package Height5.4
    Package Width11.1
    Package Length15.1
    Weight19.5 PG
    Part CategoryReplacement Parts
    Ring Gear RotationStandard
    Ring Gear Tooth Quantity37
    Differential Case Design TypeFord 9
    PositionRear
    Cover Bolt QuantityDropout
    Pinion Spline Count28
    Ring Gear Material8620 Steel
    Ring Gear Outside Diameter9 in.
    Pinion Shaft Diameter1.313 in.
    Pinion Gear Tooth Quantity9
    Gear Ratio4.11
    Ring Gear Bolt Quantity10
    Part FitmentDirect Fit
    Mounting LocationRear
    ApplicationFord 9.0
    Vendor Part NumberF9411
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning