New Item Badge
3.73 Ratio Ring and Pinion Gear Set Fits Select Chevy Camaro, GMC Canyon w/GM 7.5/7.6/7.625 in. 10-Bolt Front and Rear Axles
InfoVehicle Info Needed
EXCELPART NUMBER: 857-GM75373OE

3.73 Ratio Ring and Pinion Gear Set Fits Select Chevy Camaro, GMC Canyon w/GM 7.5/7.6/7.625 in. 10-Bolt Front and Rear Axles

$15831
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

2-in-1 Folding Creeper & Z-Seat

JEGS

2-in-1 Folding Creeper & Z-Seat

Part Number : 555-81165
$5519$68.99
You Save$13.80
3-Ton Aluminum Floor Jack [6,000 lbs. Capacity]

JEGS

3-Ton Aluminum Floor Jack [6,000 lbs. Capacity]

Part Number : 555-80077
$22099$285.99
You Save$65.00
6-Ton Jack Stands

JEGS

6-Ton Jack Stands

Part Number : 555-80037
$8099$89.99
You Save$9.00
Breaker Bar [1/2 in. Drive, 30 in. L]

JEGS

Breaker Bar [1/2 in. Drive, 30 in. L]

Part Number : 555-W32126
$3399$40.99
You Save$7.00

3.73 Ratio Ring and Pinion Gear Set
  • 1972-2013 Chevy Camaro, GMC Canyon, Pontiac Firebird, Buick Skylark, Oldsmobile Cutlass
  • GM 7.5/7.6/7.625 in. 10-Bolt Front and Rear Axles
  • 41/11 Ring/Pinion Tooth Count
  • 8620 Steel Construction
  • Set of 2

    The EXCEL from Richmond GM75373OE is a 3.73 ratio ring and pinion gear set built for the GM 7.5/7.6/7.625 in. 10-Bolt axle. Swapping in a different gear ratio is one of the most direct ways to change how a vehicle accelerates, tows, and cruises, and it is also the fix when a worn or chipped set starts to whine or clunk under load. It fits select Chevy, GMC, Pontiac, Buick, Oldsmobile, Cadillac, Hummer & Isuzu vehicles from 1972 to 2013; the complete vehicle application list appears below. The ring gear is machined from 8620 Steel and the ring and pinion are supplied as a matched set that must be installed together. Carrier compatibility matters on this axle: this set requires a 3.23 Ratio and Higher carrier.

    EXCEL from Richmond GM75373OE Compatibility Notes:

    • Designed for the GM 7.5/7.6/7.625 in. 10-Bolt axle
    • 3.73:1 final drive gear ratio
    • 41-tooth ring gear paired with a 11-tooth pinion
    • 27-spline pinion shaft accepts the matching pinion yoke
    • Pinion shaft diameter: 1.438 in.
    • Ring gear rotation: Standard
    • Ring gear material: 8620 Steel
    • Requires a 3.23 Ratio and Higher carrier
    • Professional installation is recommended: pinion depth, bearing preload, and backlash must be set and confirmed with a gear marking compound pattern check, followed by a proper gear break-in.

    EXCEL from Richmond GM75373OE Vehicle Applications:

    • Chevy: 1985-2005 Astro; 1995-2001 Blazer; 1982-2002 Camaro; 1977-1996 Caprice; 2004-2013 Colorado; 1991-1994 Commercial Chassis; 1977-1987 El Camino; 1977-1985, 1994-1996 Impala; 1975, 1978-1983 Malibu; 1978-1988 Monte Carlo; 1976-1979 Nova; 1982-2004 S10; 1983-1994 S10 Blazer
    • GMC: 2004-2012 Canyon; 2002-2005 Envoy; 2002-2005 Envoy XL; 2004-2005 Envoy XUV; 1992-2005 Jimmy; 1982-1990 S15; 1983-1991 S15 Jimmy; 1985-2005 Safari; 1991-2004 Sonoma; 1991 Syclone
    • Pontiac: 1975-1986 Bonneville; 1975-1981 Catalina; 1977-2002 Firebird; 1978-1980 Grand Am; 1977-1983 Grand LeMans; 1977-1987 Grand Prix; 1975-1978 Grand Safari; 1977-1981 Laurentian; 1977-1981 LeMans; 1977-1986 Parisienne; 1977-1979 Phoenix; 1972-1977 Ventura
    • Buick: 1973-1975 Apollo; 1977-1981 Century; 1991-1996 Commercial Chassis; 1976-1985 Electra; 1977-1983 Estate Wagon; 1975-1985 LeSabre; 1977-1979 Opel; 1977-1987 Regal; 1977-1978 Riviera; 1991-1996 Roadmaster; 1975-1979 Skylark
    • Oldsmobile: 1977-1984 98; 1991-1994, 1996-2004 Bravada; 1977-1984 Custom Cruiser; 1977-1981, 1985-1987 Cutlass; 1978-1984 Cutlass Calais; 1980-1983 Cutlass Cruiser; 1977-1980, 1985-1987 Cutlass Salon; 1977-1988 Cutlass Supreme; 1977-1985 Delta 88; 1976-1979 Omega
    • Cadillac: 1987-1990 Brougham; 1982-1984 DeVille; 1982-1990 Fleetwood
    • Hummer: 2006-2010 H3; 2009-2010 H3T
    • Isuzu: 2003-2008 Ascender; 1981-1995 Pickup; 1991-2002 Rodeo; 2001-2002 Rodeo Sport
  • Part TypeRing and Pinion
    BrandEXCEL
    Package Height5.3
    Package Width11.2
    Package Length15.0
    Weight12.5 PG
    Part CategoryReplacement Parts
    Ring Gear RotationStandard
    Ring Gear Tooth Quantity41
    Differential Case Design TypeGM 7.5, GM 7.6 IFS, GM 7.625
    PositionFront, Rear
    Differential Carrier Break3.23 Ratio and Higher
    Cover Bolt Quantity10
    Pinion Spline Count27
    Ring Gear Material8620 Steel
    Ring Gear Outside Diameter7.5 in.
    Pinion Shaft Diameter1.438 in.
    Pinion Gear Tooth Quantity11
    Gear Ratio3.73
    Ring Gear Bolt Quantity10
    Part FitmentDirect Fit
    Mounting LocationFront
    ApplicationGM 7.6 IFS
    Vendor Part NumberGM75373OE
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning