Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededFLOWMASTERPART NUMBER: 389-17178
Force II Cat-Back Exhaust System 1998-2001 Dodge Ram 1500/2500 5.2/5.9L
$58495
Ships on 09/09/2026
Lowest Price GuaranteeDodge
Force II Cat-Back Exhaust System1998-2001 Dodge Ram 1500/2500 5.2/5.9L 3" Tubing, No Tips Single Side Exit 70 Series Big Block Muffler Aluminized Steel
FLOWMASTER MUFFLERS 17178 Features:
This Flowmaster® American Thunder® Cat-back System is for 1998-2001 Dodge Ram 1500 trucks with 3.9L, 5.2L or 5.9L engines and 1998-2002 2500/3500 trucks with the 5.9L engine, and all wheelbases. Manufactured using durable aluminized steel, the kit features two adapter pipes that flow into the 70 Series Big Block II™ performance muffler for a deep mellow tone with minimal interior resonance. The single 3.00-inch mandrel-bent tailpipe uses the factory hanger locations for easy mounting and exits on the passenger side of the vehicle behind the rear wheel which is ideal for towing. Includes all necessary parts and hardware for an easy bolt-on installation. Covered by our 3-year Limited Warranty. Notes: Fits both 2 & 4 wheel drive models and all wheelbases.- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- 70 Series Big Block II Performance Muffler
- Dyno-tuned for Maximum Performance
- Mild Interior Tone with Minimal Drone
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Quick and Easy Installation
Improved Performance with a Moderate Exhaust Tone
Flowmaster Force II Exhaust Systems for Trucks and SUVs are perfect for anyone looking for a performance tone enhancement but concerned about installing an exhaust system that is too aggressive for daily street driving. These systems deliver a moderate interior and exterior tone and are suited to customers looking for efficiency improvements without loud noise.
Part TypeExhaust System
Product LineFlowmaster Force II Exhaust Systems for Truck & SUVs
BrandFLOWMASTER
Package Height9.0
Package Width15.0
Package Length50.0
Weight42.8 PG
Tailpipe Diameter (In.)3
Muffler Inlet Inside Diameter3 in.
Hangers IncludedYes
Main Piping Diameter3 in.
Tail Pipe QuantitySingle
Inlet TypeClamp-On
Catalytic Converter Quantity0
Exit LocationPassenger side
Inlet QuantityOne
Muffler Body Length22 in.
Sound LevelModerate
Muffler Body MaterialAluminized Steel
Gasket Or Seal IncludedNo
Exhaust Tip IntercooledNo
Pipe ColorSilver
System FinishAluminized
Muffler Quantity1
Muffler Inlet Outside Diameter3.13 in.
Exit QuantityOne
Muffler Flanged OutletNo
Tip QuantityNone
Exhaust TypeSingle
Catalytic Converter IncludedNo
Heat Shield IncludedNo
Part CategoryPerformance Parts
Hardware IncludedYes
Exhaust Tip Quantity0
Valve IncludedNo
Muffler TypeChambered
Pipe MaterialAluminized Steel
Muffler Body Width10 in.
Tail Pipe Tapered OutletNo
Muffler Body ShapeOval
Mounting Bracket IncludedYes
Muffler Outlet Quantity1
Muffler FinishBlack High-Temperature Paint Finish
Inlet Diameter2.50 in.
Clamps IncludedYes
Muffler StyleChambered
FinishAluminized
Exit StyleSingle Out Side
Muffler Body Height5 in.
Tip IncludedNo
Clamping TypeU-Bolt
Muffler Flanged InletNo
Spring Bolt Kit IncludedNo
Muffler Series70 Series Big Block
QuantitySold as a kit
Muffler IncludedYes
System StyleMid-section back
Tail Pipe Outlet Outside Diameter3 in.
Muffler ConfigurationSingle inlet/Single outlet
System MaterialSteel
Valve TypeNot Applicable
Intermediate Pipe Diameter3 in (76.2 mm)
Part FitmentDirect Fit
Vendor Part Number17178
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
