$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Made in USA
17201 American Thunder Crossmember-Back Exhaust System for 1967-1969 Chevy Camaro, Pontiac Firebird 2WD V8
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17201

17201 American Thunder Crossmember-Back Exhaust System for 1967-1969 Chevy Camaro, Pontiac Firebird 2WD V8

$94395$1049.95You Save$106.00
ShippingShips on Nov 24, 2026
Lowest PriceLowest Price Guarantee

Items You Need

123-Piece Tool Set with Carry Case

JEGS

123-Piece Tool Set with Carry Case

Part Number : 555-80427
$3199$51.99
You Save$20.00
2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

JEGS

2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

Part Number : 555-80006
$19599$269.99
You Save$74.00
6-Ton Jack Stands

JEGS

6-Ton Jack Stands

Part Number : 555-80037
$6479$89.99
You Save$25.20
Wheel Chock [Solid Rubber]

JEGS

Wheel Chock [Solid Rubber]

Part Number : 555-W41001
$1299$14.99
You Save$2.00

GM Camaro/Firebird V8
American Thunder Crossmember-Back Exhaust System
  • 1967-1969 Chevy Camaro
  • 1967-1969 Pontiac Firebird
  • 2WD V8/L6 Engines
  • 3 in. Tubing
  • Tips Not Included
  • Dual Rear Exit
  • Super 40 Series Muffler
  • Aluminized Steel
  • Sold as a Kit

    Flowmaster 17201 Features:

    Breakdown of Included Items

    • Hangers and Hardware Included
    • H-pipe Crossover gives Maximum Power
    • 16-gauge Mandrel-bent Aluminized Steel Tubing
    • Deep Powerful Sound with (2) Super 40 Series Mufflers
    • Moderate to Aggressive Exterior Exhaust Tone
    • True Dual Exhaust System
    • Mandrel-bent tailpipes are custom-bent to tuck up high above the rear end and exit with a slight turn down at the quarter panels behind the rear wheels
    • Manufacturer 3-year Limited Warranty

    Flowmaster 17201 Notes:

    • Header Reducers or Downpipes for Factory Manifolds Not Included
    • Does not fit convertibles without an X-brace modification. The brace must be shimmed down enough to clear the new exhaust pipes.

    Emissions Note:

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • Experience An Exhaust System Tuned for Performance and Tone

      If you need an exhaust system that has been dyno tuned to produce maximum performance, look no further than Flowmaster's American Thunder Exhaust Systems. This line, designed for passenger cars, produces a range of systems that offer moderate to aggressive exhaust notes. Available in axle, cat, and header-back configurations, Flowmaster has you covered. To ensure durability and ease of installation, these kits are made from 16-gauge mandrel bent tubing and includes the necessary hangers and hardware.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Cars
    BrandFLOWMASTER
    Package Height13.0
    Package Width20.25
    Package Length42.25
    Weight58.0 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantityDual
    Inlet TypeWeld-On
    Catalytic Converter Quantity0
    Exit LocationSplit Rear
    Inlet QuantityTwo
    Sound LevelAggressive
    Muffler Body MaterialAluminized Steel
    Gasket Or Seal IncludedNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity2
    Muffler Inlet Outside Diameter3.13 in.
    Exit QuantityTwo
    Muffler Flanged OutletNo
    Tip QuantityNone
    Exhaust TypeDual
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip Quantity0
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter3 in.
    Clamps IncludedYes
    Muffler StyleChambered
    FinishAluminized
    Exit StyleDual Out Rear
    Tip IncludedNo
    Clamping TypeU-Bolt
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler SeriesSuper 40 Series
    QuantitySold as a kit
    Muffler IncludedYes
    System StyleCrossmember Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationSingle inlet/Single outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Intermediate Pipe Diameter3 in (76.2 mm)
    Part FitmentDirect Fit
    Vendor Part Number17201
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    ITEM YOU MAY ALSO CONSIDER

    American Thunder Header-Back Exhaust System 1968-1970 Mopar B-Body V8

    FLOWMASTER

    American Thunder Header-Back Exhaust System 1968-1970 Mopar B-Body V8

    Part Number : 389-17382
    $1,12395$1249.95
    You Save$126.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning