Made in USA
American Thunder Cat-Back Performance Exhaust System For 1986-1991 Chevrolet Camaro and Pontiac Firebird 5.0L or 5.7L Engine
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17234

American Thunder Cat-Back Performance Exhaust System For 1986-1991 Chevrolet Camaro and Pontiac Firebird 5.0L or 5.7L Engine

$72795
2 left in stock
ShippingShips on Nov 09, 2026
Lowest PriceLowest Price Guarantee

GM Camaro/Firebird V8
American Thunder Cat-Back Performance Exhaust System
  • 1986-1991 Chevrolet Camaro and Pontiac Firebird
  • 5.0L or 5.7L Engine
  • Main Piping Diameter: 3 in.
  • Exit Style: Dual Out Rear
  • Sound Level: Moderate

    This american thunder cat-back exhaust system replaces the factory piping with mandrel-bent tubing and a specially tuned muffler to open up exhaust flow and sharpen the exit note. All factory hanger locations and installation hardware are retained, so the system bolts into place without cutting or welding.

    American Thunder Cat-Back Performance Exhaust System For 1986-1991 Chevrolet Camaro and Pontiac Firebird 5.0L or 5.7L Engine Specifications:

    • For 1986-1991 Chevrolet Camaro and Pontiac Firebird.
    • 5.0L or 5.7L Engine.
    • System Type: Cat-Back.
    • Exhaust Series: American Thunder.
    • Main Piping Diameter: 3 in.
    • Exit Style: Dual Out Rear.
    • Muffler Type: Chambered.
    • Exhaust Tip Quantity: 2.
    • Exhaust Tip Diameter: 3 in.
    • Exhaust Tip Finish: Polished.
    • Sound Level: Moderate.
    • Valve Included: No.
    • Fitment Note: Requires 2.50-inch Flanged Catalytic Converter.

    Emissions Note:

    This part is legal for sale or uses on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • Experience An Exhaust System Tuned for Performance and Tone

      If you need an exhaust system that has been dyno tuned to produce maximum performance, look no further than Flowmaster's American Thunder Exhaust Systems. This line, designed for passenger cars, produces a range of systems that offer moderate to aggressive exhaust notes. Available in axle, cat, and header-back configurations, Flowmaster has you covered. To ensure durability and ease of installation, these kits are made from 16-gauge mandrel bent tubing and includes the necessary hangers and hardware.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Cars
    BrandFLOWMASTER
    Package Height16.0
    Package Width29.0
    Package Length39.0
    Weight56.3 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter2.50 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Tip CutSlant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationSplit Rear
    Inlet QuantityOne
    Muffler Body Length17 in.
    Sound LevelModerate
    Muffler Body MaterialAluminized Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity1
    Muffler Inlet Outside Diameter3 in.
    Exit QuantityTwo
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip QuantityDual
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryExhaust Systems & Components
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity2
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeSlash Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity2
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.50 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size3 in (76.2 mm)
    FinishAluminized
    Exit StyleDual Out Rear
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeU-Bolt
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series80 Series Crossflow
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionWelded
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationSingle inlet/Dual outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Tip Edge StyleNon-rolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter3 in (76.2 mm)
    Exhaust Tip Diameter3 in.
    Part FitmentDirect Fit
    Vendor Part Number17234
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning