Made in USA
17325 American Thunder Cat-Back Exhaust System 1999-2002 Silverado/Sierra 3/4-Ton 6.0L (Not HD)
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17325

17325 American Thunder Cat-Back Exhaust System 1999-2002 Silverado/Sierra 3/4-Ton 6.0L (Not HD)

$58495
1 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

GM
American Thunder Cat-Back Exhaust System
  • 1999-2002 Silverado/Sierra 3/4-Ton 6.0L (Not HD)
  • 3.5" Tubing
  • 4" Polished SS Tips
  • Single Side Exit
  • 50 Series Big Block Muffler
  • Aluminized Steel

    FLOWMASTER MUFFLERS 17325 Features:

    For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. This American Thunder system delivers a moderate interior tone with a deep powerful exterior tone and is suited to the enthusiast who wants their performance to be heard. The system attaches to the back of the catalytic converter with a dual inlet 50 Series Big Block muffler for a deep powerful sound without being obnoxious. Includes a large custom formed aluminum heat shield with stainless clamps and easily attaches directly to the muffler body. The custom bent 3.00-inch aluminized steel tailpipe uses the factory hanger locations for an easy installation and exits out behind the right side rear wheel which is ideal for towing. The tailpipe is finished off with a large 3.50-inch polished 304 stainless steel tip embossed with the Flowmaster logo. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and easy to follow instructions for a trouble free installation. Notes: Fits 2/4 wheel drive trucks with the extended cab/short bed configuration - 143.5-inch wheelbase.
    • Includes an Aluminum Heat Shield for Rapid Heat Dissipation
    • Includes a Large 3.50-inch Polished 304 Stainless Steel Tip
    • Includes Hangers and Hardware for an Easy Installation
    • Mandrel-bent 16-gauge Aluminized Steel Tubing
    • Dyno-tuned for Maximum Performance
    • Stainless Steel Heat Shield Clamps
    • Uses the Factory Hanger Locations
    • Aggressive Exterior Exhaust Tone
    • Easy Installation
  • Part TypeExhaust System
    BrandFLOWMASTER
    Package Height13.0
    Package Width16.0
    Package Length18.0
    Weight50.35 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter2.75 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantitySingle
    Inlet TypeClamp-On
    Tip CutSlant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationSide
    Inlet QuantityTwo
    Sound LevelAggressive
    Muffler Body MaterialAluminized Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity1
    Muffler Inlet Outside Diameter2.88 in.
    Exit QuantityOne
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip Quantity1
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedYes
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity1
    Muffler Inlet LocationDual
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.75 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size3.5 in (88.9 mm)
    FinishAluminized
    Exit StyleSingle Out Side
    Tip IncludedYes
    Clamping TypeU Bolt
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series50 Series Big Block
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationDual inlet/Single outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Tip Edge StyleRolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter2.75 in (69.85 mm)
    Exhaust Tip Diameter3.50 in.
    Part FitmentDirect Fit
    Vendor Part Number17325
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!