Made in USA
17328 American Thunder Cat-Back Exhaust System 2001-2004 GM Silverado/Sierra HD 6.0L/8.1L
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17328

17328 American Thunder Cat-Back Exhaust System 2001-2004 GM Silverado/Sierra HD 6.0L/8.1L

$77995
ShippingShips on 10/12/2026
Lowest PriceLowest Price Guarantee

GM
American Thunder Cat-Back Exhaust System
  • 2001-2004 GM Silverado/Sierra HD 6.0L/8.1L
  • 3.5" Tubing
  • 4" Polished SS Tips
  • Single Side Exit
  • 50 Series Big Block Muffler
  • Aluminized Steel

    FLOWMASTER MUFFLERS 17328 Features:

    For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. This American Thunder system for the 2001-2006 (2007 Classic) Chevrolet Silverado, GMC Sierra 2500HD/3500HD with 6.0L or 8.1L engine with dual inlet muffler, delivers a moderate interior tone with a deep powerful exterior tone and is suited to the enthusiast who wants their performance to be heard. The system attaches to the back of the catalytic converter with a dual inlet 50 Series Big Block muffler for a deep powerful sound without being obnoxious. Includes a large custom formed aluminum heat shield with stainless clamps and easily attaches directly to the muffler body. The custom bent 3.50-inch aluminized steel tailpipe uses the factory hanger locations for an easy installation and exits out behind the right side rear wheel which is ideal for towing. The tailpipe is finished off with a large 4.00-inch polished 304 stainless steel tip embossed with the Flowmaster logo. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and easy to follow instructions for a trouble free installation. Covered by our 3-year Limited Warranty. Check out system #817328 if you prefer a Stainless Steel exhaust system that is covered with a Lifetime Limited Warranty.
    • Includes an Aluminum Heat Shield for Rapid Heat Dissipation
    • Includes a Large 4.00-inch Polished 304 Stainless Steel Tip
    • Includes Hangers and Hardware for an Easy Installation
    • Mandrel-bent 16-gauge Aluminized Steel Tubing
    • Dyno-tuned for Maximum Performance
    • Stainless Steel Heat Shield Clamps
    • Uses the Factory Hanger Locations
    • Aggressive Exterior Exhaust Tone
    • Easy Installation
    • The Classic Sound of Flowmaster

      Flowmaster American Thunder Exhaust Systems for Truck/SUVs are ideal for the one looking for a moderate-to-aggressive exhaust tone, inside and out. The mufflers are tuned to deliver more power, torque, throttle response, and mileage. With easy fitment in mind, each system has mandrel-bent tubing for maximum performance and flow; and includes all necessary parts and hardware for installation.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Truck/SUV
    BrandFLOWMASTER
    Package Height15.0
    Package Width18.0
    Package Length63.0
    Weight55.5 PG
    Tailpipe Diameter (In.)3.5
    Muffler Inlet Inside Diameter3.50 in.
    Hangers IncludedYes
    Main Piping Diameter3.50 in.
    Tail Pipe QuantitySingle
    Inlet TypeClamp-On
    Tip CutStraight
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationPassenger side
    Inlet QuantityTwo
    Sound LevelAggressive
    Muffler Body MaterialAluminized Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.63 in.
    Exit QuantityOne
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip QuantitySingle
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity1
    Muffler Inlet LocationDual
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter3 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size4 in (101.6 mm)
    FinishAluminized
    Exit StyleSingle Out Side
    Tip IncludedYes
    Clamping TypeU-Bolt
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series50 Series Big Block
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionWelded
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3.50 in.
    Muffler ConfigurationDual inlet/Single outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Tip Edge StyleNon-rolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter3.5 in (88.9 mm)
    Exhaust Tip Diameter4 in.
    Part FitmentDirect Fit
    Vendor Part Number17328
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    ITEM YOU MAY ALSO CONSIDER

    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!