Made in USA
17406 American Thunder Cat-Back Exhaust System 2004-2008 for Nissan Titan 5.6L V8 (Exc. Crew Cab)
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17406

17406 American Thunder Cat-Back Exhaust System 2004-2008 for Nissan Titan 5.6L V8 (Exc. Crew Cab)

$1,24995
ShippingShips on 09/29/2026
Lowest PriceLowest Price Guarantee

Nissan
American Thunder Cat-Back Exhaust System
  • 2004-2008 for Nissan Titan 5.6L V8 (Exc. Crew Cab)
  • 2.5" Tubing
  • 3" Polished SS Tip
  • Dual Rear/Side Exit
  • 70 Series Big Block Muffler
  • Aluminized Steel

    FLOWMASTER MUFFLERS 17406 Features:

    Introducing the American Thunder cat-back exhaust system for the 2004-2015 Nissan Titan with 5.6L engine. This performance exhaust system bolts up to the factory cat pipes with large dual 2.50-inch mandrel-bent aluminized tubing flowing into a Scavenger Series Y-pipe that creates a stronger signal than conventional y-pipes by using two D-shaped ports back to back, giving a larger surface area than just two round pipes joined together. This creates a much stronger scavenging effect to help evacuate the cylinders during the exhaust stroke netting more power, torque and a deep unique tone. The added torque is especially useful when towing. The system flows out of the Scavenger Y-collector into a 70 Series Big Block II performance muffler giving a deep powerful sound outside the vehicle, with a moderate tone inside the cab. The mandrel-bent tailpipes exit either out the sides behind the rear tires, which is ideal for towing or straight out the back under the rear bumper for a muscular look. The dual tailpipes are finished off with a pair of 3.00-inch polished stainless steel tips embossed with the Flowmaster name. The system utilizes the factory hanger locations and connections and includes all necessary parts, hardware and detailed instructions for an easy at home installation.
    • Includes Hangers and Hardware for an Easy Installation
    • Mandrel bent 16-gauge Aluminized Steel Tubing
    • Dual 3.00-inch Polished Stainless Steel Tips
    • 70 Series Big Block II Performance Muffler
    • Dyno Tuned for Maximum Performance
    • Uses the Factory Hanger Locations
    • Moderate Exterior Exhaust Tone
    • Scavenger Series Y-pipe
    • Easy Installation
  • Part TypeExhaust System
    BrandFLOWMASTER
    Package Height15.0
    Package Width17.0
    Package Length35.0
    Weight89.2 PG
    Tailpipe Diameter (In.)2.5
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter2.50 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Tip CutStraight
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationSplit rear/Split side
    Inlet QuantityTwo
    Muffler Body Length22.25 in.
    Sound LevelModerate
    Muffler Body MaterialAluminized Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.13 in.
    Exit QuantityTwo
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip Quantity2
    Exhaust Tip ResonatedNo
    Exhaust TypeDual
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity2
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity2
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter3 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size3 in (76.2 mm)
    FinishAluminized
    Exit StyleDual Out Rear
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series70 Series Big Block
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter2.50 in.
    Muffler ConfigurationSingle inlet/Dual outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Tip Edge StyleRolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter3 in (76.2 mm)
    Exhaust Tip Diameter3 in.
    Part FitmentDirect Fit
    Vendor Part Number17406
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!