Made in USA
Force II Cat-Back Exhaust System 2005-2010 Dodge Dakota 3.7L V6/4.7L V8
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-17458

Force II Cat-Back Exhaust System 2005-2010 Dodge Dakota 3.7L V6/4.7L V8

$51995
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Dodge
Force II Cat-Back Exhaust System
  • 2005-2010 Dodge Dakota 3.7L V6/4.7L V8
  • 2.5" Tubing, 3.5" Polished SS Tips
  • Single Side Exit
  • Super 50 Series Muffler
  • Aluminized Steel

    FLOWMASTER MUFFLERS 17458 Features:

    This Flowmaster Force II® cat-back exhaust system is custom designed for 2005-2010 Dodge Dakota trucks with V6 or V8 engines and is perfect for the person looking for a moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a mandrel-bent aluminized steel inlet pipe flowing into a Super 50™ Series muffler for a mild performance exterior sound. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a large 3.50-inch polished embossed stainless steel tip. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Note: Fits 2/4 wheel drive models and all wheelbases.
    • Includes Hangers and Hardware for an Easy Installation
    • Mandrel-bent 16 Gauge Aluminized Steel Tubing
    • Large 3.50-inch Polished 304 Stainless Steel Tip
    • Moderate Performance Exterior Exhaust Tone
    • Dyno Tuned for Maximum Performance
    • Super 50 Series Performance Muffler
    • Uses the Factory Hanger Locations
    • 3-year Limited Warranty
    • Improved Performance with a Moderate Exhaust Tone

      Flowmaster Force II Exhaust Systems for Trucks and SUVs are perfect for anyone looking for a performance tone enhancement but concerned about installing an exhaust system that is too aggressive for daily street driving. These systems deliver a moderate interior and exterior tone and are suited to customers looking for efficiency improvements without loud noise.

    Part TypeExhaust System
    Product LineFlowmaster Force II Exhaust Systems for Truck & SUVs
    BrandFLOWMASTER
    Package Height10.0
    Package Width15.0
    Package Length49.0
    Weight41.0 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantitySingle
    Inlet TypeClamp-On
    Tip CutSlant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationRear
    Inlet QuantityOne
    Muffler Body Length17 in.
    Sound LevelModerate
    Muffler Body MaterialAluminized Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishAluminized
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.13 in.
    Exit QuantityOne
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip Quantity1
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity1
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe MaterialAluminized Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.50 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size4 in (101.6 mm)
    FinishAluminized
    Exit StyleSingle Out Side
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler SeriesSuper 50 Series
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationSingle inlet/Single outlet
    System MaterialSteel
    Valve TypeNot Applicable
    Tip Edge StyleRolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter3 in (76.2 mm)
    Exhaust Tip Diameter3.50 in.
    Part FitmentDirect Fit
    Vendor Part Number17458
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!