$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Made in USA
738173 Signature Series Cat-Back Exhaust System Fits Select Toyota Tacoma 2.4L, 2WD/4WD, All Wheelbases
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-738173

738173 Signature Series Cat-Back Exhaust System Fits Select Toyota Tacoma 2.4L, 2WD/4WD, All Wheelbases

$1,27495
ShippingShips on 11/24/2026
Lowest PriceLowest Price Guarantee

Items You Need

123-Piece Tool Set with Carry Case

JEGS

123-Piece Tool Set with Carry Case

Part Number : 555-80427
$3199$51.99
You Save$20.00
2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

JEGS

2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

Part Number : 555-80006
$19599$269.99
You Save$74.00
6-Ton Jack Stands

JEGS

6-Ton Jack Stands

Part Number : 555-80037
$6479$89.99
You Save$25.20
Wheel Chock [Solid Rubber]

JEGS

Wheel Chock [Solid Rubber]

Part Number : 555-W41001
$1299$14.99
You Save$2.00

Toyota
Signature Series Cat-Back Exhaust System
  • Fits Select Toyota Tacoma 2.4L, 2WD/4WD, All Wheelbases
  • 2.5 in. Tubing
  • Dual Out Rear Exit
  • Signature Series Muffler
  • 4 in. Black Chrome Tips
  • Moderate Sound
  • Stainless Steel
  • Natural Finish

    Flowmaster 389-738173 Features:

    Flowmaster’s Signature Series Cat-Back Exhaust System is engineered for Toyota Tacoma trucks equipped with the 2.4L engine and built entirely from premium brushed 304 stainless steel for exceptional strength, corrosion resistance, and long-term durability. A 3.00 in. mandrel-bent inlet pipe feeds into a straight-through Signature Series muffler, designed to improve exhaust flow, sharpen throttle response, and deliver the deep performance tone the Signature Series is known for. Hand-crafted TIG welding provides clean, precise welds that enhance both durability and appearance. Dual 2.50 in. mandrel-bent tailpipes exit at an angle behind the rear driver-side wheel, routing exhaust away from trailers, boats, or equipment during towing. The system is completed with dual 4.0 in. PVD-coated black chrome 304 stainless steel tips, giving the Tacoma a bold, custom look that complements its upgraded exhaust note. Dyno-proven gains of up to 11 hp and 17 lb-ft at the rear wheels further elevate performance. Installation is straightforward using factory hanger locations along with an included additional hanger for the new left-side tailpipe, plus detailed instructions and all necessary hardware. Fits 2WD and 4WD models across all wheelbases.
    • 3.0 in. and 2.5 in. mandrel-bent 304 stainless steel tubing increases exhaust velocity and long-term durability
    • PVD-coated black chrome stainless steel tips deliver a high-end, custom appearance
    • Factory-style hangers and complete hardware kit allow a simple, direct bolt-on installation
    • Straight-through Signature Series muffler produces a deep, aggressive-to-moderate performance tone
    • Dyno-tested gains of up to 11 hp and 17 lb-ft compared to the stock exhaust system
    • Brushed stainless finish removes tooling marks for a cleaner, more refined appearance
    • Hand TIG-welded construction improves heat control and provides upscale, precision weld quality
    • Includes Flowmaster’s Lifetime Limited Warranty
    • Tuned exhaust note enhances sound quality both inside and outside the truck
  • Part TypeExhaust System
    BrandFLOWMASTER
    Package Height11.25
    Package Width16.25
    Package Length58.5
    Weight83.0 PG
    Tailpipe Diameter (In.)2.5
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter2.50 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationDual Out Rear
    Inlet QuantityOne
    Muffler Body Length18 in.
    Sound LevelModerate
    Muffler Body Material304 Stainless Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishNatural
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.13 in.
    Exit QuantityDual
    Muffler Flanged OutletNo
    Tip Quantity2
    Exhaust Tip ResonatedNo
    Muffler Outlet LocationDual
    Exhaust TypeCat-Back
    Catalytic Converter IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallDouble Wall
    Exhaust Tip Quantity2
    Muffler Inlet LocationCenter
    Exhaust Tip FinishBlack Chrome
    Exhaust Tip EdgeAngle Cut
    Valve IncludedNo
    Muffler TypeAbsorption
    Pipe Material304 Stainless Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity2
    Muffler FinishNatural
    Mount TypeUses Factory Hangers
    Clamps IncludedYes
    Muffler StyleSignature Series
    FinishNatural
    Exit StyleDual Out Rear
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler SeriesSignature Series
    QuantitySold as a Kit
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat-Back
    Tail Pipe Outlet Outside Diameter2.50 in.
    Muffler ConfigurationSingle inlet/Dual outlet
    System Material409 Stainless Steel
    Valve TypeNot Applicable
    Intermediate Pipe Diameter2.5 in (63.5 mm)
    Exhaust Tip Diameter4 in.
    Part FitmentDirect Fit
    Vendor Part Number738173
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning