Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededFLOWMASTERPART NUMBER: 389-817505
Force II Cat-Back Exhaust System 2008-2013 Ford F-250 6.2/6.8L V8
$1,29995
Ships Tomorrow
Lowest Price GuaranteeFord
Force II Cat-Back Exhaust System2008-2013 Ford F-250 6.2/6.8L V8 3" Tubing, 3.5" Polished SS Tips Dual Rear/Side Exit 50 Series HD Muffler 409S Stainless Steel
FLOWMASTER MUFFLERS 817505 Features:
The Force II® Cat-back exhaust system for 2008-2013 Ford F-250/F-350 Super Duty trucks with a V8 or V10 gas engine is perfect for the person looking for mild to moderate sound levels with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 50 HD Series™ performance muffler with large 4.00-inch internals and dual mandrel-bent 2.50-inch 409 stainless steel tailpipes for maximum performance and a deep powerful sound. The system comes with your choice of tailpipe exits and can be configured for either straight out the back under the rear bumper for a muscular look, or out the sides behind the rear wheels which is ideal for towing. The tailpipes are finished off with a pair of large 3.50-inch polished 304 stainless steel tips and is covered by our Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for easy installation you can do at home.- Includes Hangers and Hardware for an Easy Installation
- Dual 3.50-inch Polished 304 Stainless Steel Tips
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Uses the Factory Hanger Locations
- 50 HD Series Performance Muffler
- Connects After Factory Resonator
- Moderate Sound Exterior Tone
- Quick and Easy Installation
- Lifetime Limited Warranty
- Flowmaster Quality
Part TypeExhaust System
BrandFLOWMASTER
Package Height15.0
Package Width16.0
Package Length59.0
Weight69.8 PG
Tailpipe Diameter (In.)3
Muffler Inlet Inside Diameter3 in.
Hangers IncludedYes
Main Piping Diameter3 in.
Tail Pipe QuantityDual
Inlet TypeClamp-On
Tip CutSlant
Exhaust Tip Material304 Stainless Steel
Catalytic Converter Quantity0
Exit LocationSplit rear/Split side
Inlet QuantityOne
Muffler Body Length18 in.
Sound LevelModerate
Muffler MaterialStainless steel
Muffler Body Material409 Stainless Steel
Exhaust Tip CutAngled
Gasket Or Seal IncludedNo
Exhaust Tip IntercooledNo
Pipe ColorSilver
System FinishNatural
Muffler Quantity1
Muffler Inlet Outside Diameter3.13 in.
Exit QuantityTwo
Tip MaterialStainless steel
Muffler Flanged OutletNo
Tip QuantitySingle
Exhaust Tip ResonatedNo
Exhaust TypeSingle
Catalytic Converter IncludedNo
Heat Shield IncludedNo
Part CategoryPerformance Parts
Hardware IncludedYes
Exhaust Tip WallSingle Wall
Exhaust Tip Quantity2
Exhaust Tip FinishPolished
Exhaust Tip EdgeRolled Edge Angle Cut
Valve IncludedNo
Muffler TypeChambered
Pipe Material409 Stainless Steel
Muffler Body Width10 in.
Tail Pipe Tapered OutletNo
Muffler Body ShapeOval
Mounting Bracket IncludedYes
Muffler Outlet Quantity2
Muffler FinishBlack High-Temperature Paint Finish
Inlet Diameter3 in.
Clamps IncludedYes
Muffler StyleChambered
Tip Outlet Size3.5 in (88.9 mm)
FinishNatural
Exit StyleDual Out Rear
Muffler Body Height5 in.
Tip IncludedYes
Clamping TypeFlat Band
Muffler Flanged InletNo
Spring Bolt Kit IncludedNo
Muffler Series50 Series HD
QuantitySold as a kit
Muffler IncludedYes
Exhaust Tip ConnectionClamp-On
System StyleCat Back
Tail Pipe Outlet Outside Diameter3 in.
Muffler ConfigurationSingle inlet/Dual outlet
System MaterialStainless steel
Valve TypeNot Applicable
Tip Edge StyleRolled edge
Tip ShapeRound
Intermediate Pipe Diameter3 in (76.2 mm)
Exhaust Tip Diameter3.50 in.
Part FitmentDirect Fit
Vendor Part Number817505
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations
