Made in USA
817513 American Thunder Cat-Back Exhaust System 2004-2005 Dodge Ram 1500 5.7L Hemi
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-817513

817513 American Thunder Cat-Back Exhaust System 2004-2005 Dodge Ram 1500 5.7L Hemi

$94995
ShippingShips on Sep 11, 2026
Lowest PriceLowest Price Guarantee

Dodge
American Thunder Cat-Back Exhaust System
  • 2004-2005 Dodge Ram 1500 5.7L Hemi
  • 3" Tubing
  • 3" Polished SS Tips
  • Single Side Exit
  • 50 Series HD Muffler
  • 409S Stainless Steel

    FLOWMASTER MUFFLERS 817513 Features:

    This Flowmaster® American Thunder® Cat-back System is for 2004-2005 Dodge Ram 1500 trucks with 5.7L Hemi engine and all wheelbases. Manufactured using durable 409S stainless steel, the kit features a 2.75-inch to 3.00-inch adapter pipe which flows into the 50 Series HD™ single in/out muffler and into a single 3.00-inch mandrel-bent stainless steel tailpipe. The 3.00-inch tailpipe exits on the passenger side of the vehicle behind the rear tire and is finished off with a 3.50-inch polished stainless steel Flowmaster tip. As an American Thunder system, it provides improved horsepower, mileage and torque along with a deep, moderate sound level on the inside and outside of the vehicle. Instructions and all the necessary hardware are included with the kit for an easy bolt-on installation. Covered by our Lifetime Limited Warranty.
    • Includes Hangers and Hardware for an Easy Installation
    • Mandrel-bent 16 Gauge Stainless Steel Tubing
    • Connects After Factory Catalytic Converter
    • Uses the Factory Hanger Locations
    • Moderate Exterior Exhaust Tone
    • Lifetime Limited Warranty
    • Easy Installation
    • The Classic Sound of Flowmaster

      Flowmaster American Thunder Exhaust Systems for Truck/SUVs are ideal for the one looking for a moderate-to-aggressive exhaust tone, inside and out. The mufflers are tuned to deliver more power, torque, throttle response, and mileage. With easy fitment in mind, each system has mandrel-bent tubing for maximum performance and flow; and includes all necessary parts and hardware for installation.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Truck/SUV
    BrandFLOWMASTER
    Package Height10.0
    Package Width15.0
    Package Length58.0
    Weight59.0 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantitySingle
    Inlet TypeClamp-On
    Tip CutSlant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationPassenger side
    Inlet QuantityOne
    Muffler Body Length19 in.
    Sound LevelModerate
    Muffler MaterialStainless steel
    Muffler Body Material409 Stainless Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishNatural
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.13 in.
    Exit QuantityOne
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip Quantity1
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity1
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe Material409 Stainless Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.75 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size3.5 in (88.9 mm)
    FinishNatural
    Exit StyleSingle Out Side
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series50 Series HD
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationSingle inlet/Single outlet
    System MaterialStainless steel
    Valve TypeNot Applicable
    Tip Edge StyleRolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter2.75 in (69.85 mm)
    Exhaust Tip Diameter3 in.
    Part FitmentDirect Fit
    Vendor Part Number817513
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!