Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededFLOWMASTERPART NUMBER: 389-817552
Force II Cat-Back Exhaust System 2012-2018 Ford Focus 2.0L
$94995
Ships on 09/08/2026
Lowest Price GuaranteeFord
Force II Cat-Back Exhaust System2012-2018 Ford Focus 2.0L 2.25" Tubing 4" Polished SS Tips Single Rear Exit 50 Series Delta Flow Muffler 409S Stainless Steel
FLOWMASTER MUFFLERS 817552 Features:
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides, S.O.R. (Single out rear) systems are the perfect choice. This Force II® system is constructed from 2.25-inch mandrel-bent stainless steel with a specially tuned resonator inline flowing back into a 50 Series™ Delta Flow® performance muffler that delivers a mild interior tone with a deep moderate exterior sound. The system uses the factory hanger locations and is finished off with a 3.50-inch polished stainless steel tip. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Connects After Factory Catalytic Converter
- 50 Series Delta Flow Performance Muffler
- Moderate Exterior Exhaust Tone
- Specially Designed Resonator
- Lifetime Limtied Warranty
Suited For Everyday Driving
Flowmaster's Force II Exhaust Systems for passenger cars are perfect for adding that Flowmaster level of performance tone enhancement, but are concerned about an exhaust system that is too aggressive for daily driving. These quieter sounding systems are mandrel bent for maximum performance and include specially selected mufflers to deliver a mild exterior and interior tone. Like all Flowmaster systems, the Force II provides improved throttle response, power and mileage. All necessary parts and hardware is included for an easy installation.
Show More
Features:
- Stock to mild exterior exhaust tone.
- Suited for everyday driving.
- Mandrel bent 16 gauge stainless steel tubing.
- Includes hangers and hardware.
Part TypeExhaust System
Product LineFlowmaster Force II Exhaust Systems for Cars
BrandFLOWMASTER
Package Height9.75
Package Width15.25
Package Length49.0
Weight48.5 PG
Tailpipe Diameter (In.)2.25
Muffler Inlet Inside Diameter2.25 in.
Hangers IncludedYes
Main Piping Diameter2.25 in.
Tail Pipe QuantitySingle
Inlet TypeFlanged
Tip CutSlant
Exhaust Tip Material304 Stainless Steel
Catalytic Converter Quantity0
Exit LocationRear
Inlet QuantityOne
Muffler Body Length17.25 in.
Sound LevelModerate
Muffler MaterialStainless steel
Muffler Body Material409 Stainless Steel
Exhaust Tip CutAngled
Gasket Or Seal IncludedNo
Exhaust Tip IntercooledNo
Pipe ColorSilver
System FinishNatural
Muffler Quantity1
Muffler Inlet Outside Diameter2.38 in.
Exit QuantityOne
Tip MaterialStainless steel
Muffler Flanged OutletNo
Tip Quantity1
Exhaust Tip ResonatedNo
Exhaust TypeSingle
Catalytic Converter IncludedNo
Heat Shield IncludedNo
Part CategoryPerformance Parts
Hardware IncludedYes
Exhaust Tip WallDouble Wall
Exhaust Tip Quantity1
Exhaust Tip FinishPolished
Exhaust Tip EdgeRolled Edge Angle Cut
Valve IncludedNo
Muffler TypeChambered
Pipe Material409 Stainless Steel
Muffler Body Width9.50 in.
Tail Pipe Tapered OutletNo
Muffler Body ShapeOval
Mounting Bracket IncludedNo
Muffler Outlet Quantity1
Muffler FinishBlack High-Temperature Paint Finish
Inlet Diameter2.25 in.
Clamps IncludedYes
Muffler StyleChambered
Tip Outlet Size4 in (101.6 mm)
FinishNatural
Exit StyleSingle Out Rear
Muffler Body Height4 in.
Tip IncludedYes
Clamping TypeFlat Band
Muffler Flanged InletNo
Spring Bolt Kit IncludedNo
Muffler Series50 Series Delta Flow
QuantitySold as a kit
Muffler IncludedYes
Exhaust Tip ConnectionClamp-On
System StyleCat Back
Tail Pipe Outlet Outside Diameter2.25 in.
Muffler ConfigurationSingle inlet/Single outlet
System MaterialStainless steel
Valve TypeNot Applicable
Tip Edge StyleRolled edge
Tip ShapeRound
Intermediate Pipe Diameter2.25 in (57.15 mm)
Exhaust Tip Diameter4 in.
Part FitmentDirect Fit
Vendor Part Number817552
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![Industrial Nitrile Gloves [5.5 mils Thick, X-Large]](https://www.jegs.com/images/mini_200/500/555/555-1128.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, X-Large]
Part Number : 555-1128
$1599$17.99
You Save$2.00
![Industrial Nitrile Gloves [5.5 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1126.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, Medium]
Part Number : 555-1126
$1599$17.99
You Save$2.00
![Industrial Nitrile Gloves [5.5 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1127.jpg)
JEGS
Part Number : 555-1128
$1599$17.99
You Save$2.00
JEGS
Part Number : 555-1126
$1599$17.99
You Save$2.00
Some parts are not legal for use in California or other states with similar laws / regulations
