
FLOWMASTERPART NUMBER: 389-817602
817602 American Thunder Cat-Back Exhaust System 2011-2018 GM Silverado/Sierra 1500 6.2L (Crew/Double Cab)
$1,17195
7 left in stockGM
American Thunder Cat-Back Exhaust System2011-2018 GM Silverado/Sierra 1500 6.2L (Crew/Double Cab) 2.5" Tubing 3.5" Polished SS Tips Dual Rear/Side Exit 50 Series HD Muffler 409S Stainless Steel
FLOWMASTER MUFFLERS 817602 Features:
The American Thunder® Cat-back exhaust system for 2011-2018 Chevrolet Silverado and GMC Sierra 1500 trucks with the 6.2L engine, is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior tone. This bolt-on stainless steel system features a 3.50-inch mandrel-bent inlet pipe flowing into the 50 Series™ HD performance muffler with large 4.00-inch internals and a built-in tuned resonance chamber to minimize interior drone. The system has dual 2.50-inch mandrel-bent tailpipes which use the factory hanger locations and are finished off with large 3.50-inch polished stainless steel tips. This exhaust system gives you choices for tailpipe exit location either out each side behind the rear tires if you do a lot of towing, or straight-out under the rear bumper for a muscular look. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 WD model with Crew Cab/Short Bed (143.5" WB), Crew Cab/Standard Bed (153" WB) and Double Cab/Standard Bed (143.5" WB).- Dyno Tuned For Maximum Performance
- Uses the Factory Hanger Locations
- 50 Series HD Performance Muffler
- Your Choice of Two Tailpipe Exits
- Clears the Factory Spare Tire
- Stainless Steel Construction
- Lifetime Limited Warranty
Part TypeExhaust System
BrandFLOWMASTER
Package Height12.0
Package Width16.5
Package Length58.0
Weight68.0 PG
Muffler Inlet Inside Diameter3.50 in.
Hangers IncludedYes
Main Piping Diameter2.50 in.
Tail Pipe QuantityDual
Inlet TypeClamp-On
Exhaust Tip Material304 Stainless Steel
Catalytic Converter Quantity0
Tip FinishPolished
Muffler Body Length18 in.
Sound LevelAggressive / Moderate
Muffler Body Material409 Stainless Steel
Exhaust Tip CutAngled
Gasket Or Seal IncludedNo
Exhaust Tip IntercooledNo
Pipe ColorSilver
Muffler Quantity1
Muffler Inlet Outside Diameter3.13 in.
Muffler Flanged OutletNo
Tip Quantity2
Exhaust Tip ResonatedNo
Exhaust TypeDual
Catalytic Converter IncludedNo
Heat Shield IncludedNo
Part CategoryPerformance Parts
Exhaust Tip WallDouble Wall
Exhaust Tip Quantity2
Exhaust Tip FinishPolished
Exhaust Tip EdgeAngle Cut
Valve IncludedNo
Muffler TypeChambered
Pipe Material409 Stainless Steel
Muffler Body Width10 in.
Tail Pipe Tapered OutletNo
Muffler Body ShapeOval
Mounting Bracket IncludedYes
Muffler Outlet Quantity2
Muffler FinishNatural
Mount TypeUses Factory Hangers
Clamps IncludedYes
FinishNatural
Exit StyleDual Out Rear
Muffler Body Height5 in.
Clamping TypeFlat Band
Muffler Flanged InletNo
Spring Bolt Kit IncludedNo
Muffler Series50 Series HD
Muffler IncludedYes
Exhaust Tip ConnectionClamp-On
Tail Pipe Outlet Outside Diameter2.50 in.
Valve TypeNot Applicable
Exhaust Tip Diameter3.50 in.
Part FitmentDirect Fit
Vendor Part Number817602
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
ITEM YOU MAY ALSO CONSIDER
Some parts are not legal for use in California or other states with similar laws / regulations




