Made in USA
Outlaw Series Cat-Back Exhaust System 2009-2014 Dodge Challenger R/T 5.7L
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-817645

Outlaw Series Cat-Back Exhaust System 2009-2014 Dodge Challenger R/T 5.7L

$1,49995
ShippingShips on Sep 03, 2026
Lowest PriceLowest Price Guarantee

Dodge
Outlaw Series Cat-Back Exhaust System
  • 2009-2014 Dodge Challenger R/T 5.7L
  • 3" Tubing
  • 3" x 7" Rectangular Stainless Steel Tips
  • Dual Rear Exit
  • 409S Stainless Steel

    FLOWMASTER MUFFLERS 817645 Features:

    This Flowmaster® Outlaw Cat-back exhaust system is designed for the 2009-2014 Dodge Challenger R/T with 5.7L Hemi engine is perfect for the person looking for a very aggressive exterior sound level when hard on the gas while maintaining a moderate tone when cruising. System features include dual 3.00-inch mandrel-bent stainless steel tubing flowing into our exclusive Scavenger Series® X-pipe for a deep unique sound while making maximum power. The stainless tubing then runs into a pair of race-proven Outlaw® Series mufflers for a deep aggressive interior and exterior sound. The tailpipes utilize the factory hanger locations for an easy installation and are finished off with quad 3.50-inch 304 polished stainless steel embossed tips for a muscular look. The system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.
    • Exclusive Scavenger X-pipe for Maximum Horsepower and Torque
    • Large 3.00-inch Mandrel-bent Dual Exhaust System
    • Quad 3.50-inch Polished 304 Stainless Steel Tips
    • Dyno Tuned For Maximum Performance
    • Aggressive Exterior & Interior Sound
    • Uses the Factory Hanger Locations
    • Stainless Steel Construction
    • Lifetime Limited Warranty
    • Easy Installation
    • Aggressive Race-Oriented Exhaust System

      Flowmaster Outlaw Series Exhaust Systems feature race-bred components that ensure minimal flow restriction (slight sound reduction) over open exhaust tubing on vehicles without catalytic converters. With easy fit in mind, these systems are mandrel-bent for maximum performance and mount using stock hanger locations. Outlaw systems are dyno-tuned to improve throttle response, deliver an ultra-aggressive interior/exterior tone, and include all necessary parts and hardware for easy installation.

    Part TypeExhaust System
    Product LineFlowmaster Outlaw Series Exhaust Systems
    BrandFLOWMASTER
    Package Height14.5
    Package Width16.5
    Package Length53.0
    Weight55.4 PG
    Muffler Body Diameter4 in.
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Tip FinishPolished
    Muffler Body Length6.50 in.
    Sound LevelAggressive
    Muffler Body Material409 Stainless Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    Muffler Quantity2
    Muffler Inlet Outside Diameter3.13 in.
    Muffler Flanged OutletNo
    Tip Quantity2
    Exhaust Tip ResonatedNo
    Exhaust TypeDual
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity2
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge
    Valve IncludedNo
    Muffler TypeChambered
    Pipe Material409 Stainless Steel
    Muffler Body Width4 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeRound
    Mounting Bracket IncludedNo
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Mount TypeFlanged
    Inlet Diameter3 in.
    Clamps IncludedYes
    FinishNatural
    Exit StyleDual Out Rear
    Muffler Body Height4 in.
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler SeriesOutlaw
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    Tail Pipe Outlet Outside Diameter3 in.
    Valve TypeNot Applicable
    Exhaust Tip Diameter3.00 x 7 in.
    Part FitmentDirect Fit
    Vendor Part Number817645
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    ITEM YOU MAY ALSO CONSIDER

    Race-Pro Cat-Back Exhaust System 2009-13 Challenger RT

    PYPES PERFORMANCE EXHAUST

    Race-Pro Cat-Back Exhaust System 2009-13 Challenger RT

    Part Number : 958-SMC20R
    $85279
    Street-Pro Cat-Back Exhaust System 2009-13 Challenger R/T

    PYPES PERFORMANCE EXHAUST

    Street-Pro Cat-Back Exhaust System 2009-13 Challenger R/T

    Part Number : 958-SMC20S
    $85279
    Violator Cat-Back Exhaust System 2009-13 Challenger RT

    PYPES PERFORMANCE EXHAUST

    Violator Cat-Back Exhaust System 2009-13 Challenger RT

    Part Number : 958-SMC20V
    $85279
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!