Made in USA
Force II Cat-Back Exhaust System 2011-2022 Dodge Durango 3.6L, 5.7L Hemi R/T, 2/4 WD
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-817651

Force II Cat-Back Exhaust System 2011-2022 Dodge Durango 3.6L, 5.7L Hemi R/T, 2/4 WD

$1,89995
2 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

Dodge
Force II Cat-Back Exhaust System
  • 2011-2022 Dodge Durango R/T 5.7L Hemi and 3.6L 2/4WD
  • 2.5" Tubing, 4" Polished SS Tips
  • Dual Rear Exit
  • (2) 60 Series Delta Flow Mufflers
  • 409S Stainless Steel

    Note: Fits 2011-2022 Dodge Durango R/T 5.7L Hemi engine and 3.6L engine, both 2 & 4 Wheel Drive models.

    Flowmaster's Force II Cat-back exhaust system for all 2011-2022 Dodge Durango R/T, Citadel, Limited, Pursuit, and Special Service models with the 5.7L Hemi engine, as well as the 3.6L engine, is perfect for the person looking for mild to moderate sound levels with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system for the 5.7L Hemi engine features all mandrel-bent 2.50-inch stainless steel tubing with a pair of specially tuned resonators flowing into a Scavenger Series® X-pipe for maximum power and a unique deep muscular tone. The Scavenger Series X-pipe flows into a pair of specially designed 60 Series™ mufflers that have a healthy deep sound outside but help keep the interior resonance down to a minimum. The mandrel-bent 2.50-inch tailpipes exit in the factory locations and are finished off with a pair of large 4.00-inch polished 304S stainless steel logo tips. This exhaust system is covered by a Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.
    Note: Fits 2 & 4 Wheel Drive models.

    Features:

    • Scavenger Series X-pipe for Maximum Power and a Deep Unique Tone
    • Specially Designed 60 Series Performance Mufflers
    • 16-gauge Mandrel-bent Stainless Steel Tubing
    • Includes a Pair of Specially Tuned Resonators
    • Uses the Factory Hanger Locations
    • Deep Powerful Exterior Tone
    • Stainless Steel Construction
    • Lifetime Limited Warranty
    • Mild Interior Tone
  • Part TypeExhaust System
    BrandFLOWMASTER
    Package Height16.0
    Package Width17.0
    Package Length30.0
    Weight80.0 PG
    Tailpipe Diameter (In.)3
    Muffler Inlet Inside Diameter2.50 in.
    Hangers IncludedYes
    Main Piping Diameter2.50 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Tip CutSlant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationSplit Rear
    Inlet QuantityTwo
    Muffler Body Length13.50 in.
    Sound LevelModerate/Mild
    Muffler MaterialStainless steel
    Muffler Body Material409 Stainless Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishNatural
    Muffler Quantity2
    Muffler Inlet Outside Diameter2.63 in.
    Exit QuantityTwo
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip QuantityDual
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity2
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe Material409 Stainless Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.50 in.
    Clamps IncludedYes
    Muffler StyleChambered
    Tip Outlet Size4 in (101.6 mm)
    FinishNatural
    Exit StyleDual Out Rear
    Muffler Body Height5 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler Series60 Series
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionWelded
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter3 in.
    Muffler ConfigurationSingle inlet/Single outlet
    System MaterialStainless steel
    Valve TypeNot Applicable
    Tip Edge StyleHalf-rolled edge
    Tip ShapeRound
    Intermediate Pipe Diameter2.5 in (63.5 mm)
    Exhaust Tip Diameter4 in.
    Part FitmentDirect Fit
    Vendor Part Number817651
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    Industrial Nitrile Gloves [5.5 mils Thick, Medium]

    JEGS

    Industrial Nitrile Gloves [5.5 mils Thick, Medium]

    Part Number : 555-1126
    $1599$17.99
    You Save$2.00
    Industrial Nitrile Gloves [5.5 mils Thick, Large]

    JEGS

    Industrial Nitrile Gloves [5.5 mils Thick, Large]

    Part Number : 555-1127
    $1599$17.99
    You Save$2.00
    Industrial Nitrile Gloves [5.5 mils Thick, X-Large]

    JEGS

    Industrial Nitrile Gloves [5.5 mils Thick, X-Large]

    Part Number : 555-1128
    $1599$17.99
    You Save$2.00
    Super Coil Ignition Coils 2007-11 Dodge 5.7L/6.1L Hemi (Dual Plug)

    ACCEL

    Super Coil Ignition Coils 2007-11 Dodge 5.7L/6.1L Hemi (Dual Plug)

    Part Number : 110-140038-8
    $39495$439.95
    You Save$45.00
    DryFlow Replacement Air Filter 2011-2017 Dodge Durango 3.6/5.7L

    AEM INDUCTION

    DryFlow Replacement Air Filter 2011-2017 Dodge Durango 3.6/5.7L

    Part Number : 598-28-20457
    $6299
    HP-2010 Performance Gold Oil Filter

    K&N

    HP-2010 Performance Gold Oil Filter

    Part Number : 599-HP-2010
    $1799
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!