Made in USA
817674 American Thunder Cat-Back Exhaust System 2007-2018 Wrangler 2/4-Door 3.6L/3.8L
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-817674

817674 American Thunder Cat-Back Exhaust System 2007-2018 Wrangler 2/4-Door 3.6L/3.8L

$69995
7 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

Jeep
American Thunder Cat-Back Exhaust System
  • 2007-2018 Wrangler 2/4-Door 3.6L/3.8L
  • 2.5" Tubing
  • 3" Polished SS Tips
  • Single Rear Exit
  • Super HP-2 Muffler
  • 409S Stainless Steel

    Flowmaster 817674 Features:

    The new Flowmaster American Thunder cat-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the person looking for maximum performance and off-road ground clearance. This system replaces the factory transverse muffler and relocates the Super HP-2 muffler behind the factory catalytic converter, providing a moderate to aggressive sound level. The system features a mandrel-bent 2.50-inch stainless steel tailpipe with a 3.00-inch polished stainless steel tip tucked up high under the rear bumper for maximum clearance. Fits both 2 and 4 door models with either the 3.8L or 3.6L engines. Because the tailpipe is tucked up so high, an aftermarket metal bumper is recommended. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.

    • Provides Maximum Clearance for Off-Road Driving
    • Super HP2 Laminar Flow Technology
    • Uses the Factory Hanger Locations
    • Stainless Steel Construction
    • Quick and Easy Installation
    • The Classic Sound of Flowmaster

      Flowmaster American Thunder Exhaust Systems for Truck/SUVs are ideal for the one looking for a moderate-to-aggressive exhaust tone, inside and out. The mufflers are tuned to deliver more power, torque, throttle response, and mileage. With easy fitment in mind, each system has mandrel-bent tubing for maximum performance and flow; and includes all necessary parts and hardware for installation.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Truck/SUV
    BrandFLOWMASTER
    Package Height9.0
    Package Width15.5
    Package Length49.0
    Weight29.8 PG
    Tailpipe Diameter (In.)2.5
    Muffler Inlet Inside Diameter2.50 in.
    Hangers IncludedYes
    Main Piping Diameter2.50 in.
    Tail Pipe QuantityDual
    Inlet TypeClamp-On
    Tip CutTurndown slant
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Exit LocationRear
    Inlet QuantityOne
    Muffler Body Length16.50 in.
    Sound LevelAggressive / Moderate
    Muffler MaterialStainless steel
    Muffler Body Material409 Stainless Steel
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishNatural
    Muffler Quantity1
    Muffler Inlet Outside Diameter2.63 in.
    Exit QuantityOne
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip Quantity1
    Exhaust Tip ResonatedNo
    Exhaust TypeSingle
    Catalytic Converter IncludedNo
    Heat Shield IncludedNo
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity1
    Exhaust Tip FinishPolished
    Exhaust Tip EdgeRolled Edge Angle Cut
    Valve IncludedNo
    Muffler TypeChambered
    Pipe Material409 Stainless Steel
    Muffler Body Width5 in.
    Tail Pipe Tapered OutletNo
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity1
    Muffler FinishBlack High-Temperature Paint Finish
    Inlet Diameter2.50 in.
    Clamps IncludedYes
    Muffler StylePerforated tube
    Tip Outlet Size3 in (76.2 mm)
    FinishNatural
    Exit StyleSingle Out Rear
    Muffler Body Height4 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Spring Bolt Kit IncludedNo
    Muffler SeriesSuper HP-2
    QuantitySold as a kit
    Muffler IncludedYes
    Exhaust Tip ConnectionWelded
    System StyleCat Back
    Tail Pipe Outlet Outside Diameter2.50 in.
    Muffler ConfigurationSingle inlet/Single outlet
    System MaterialStainless steel
    Valve TypeNot Applicable
    Tip Edge StyleRolled edge, double-wall
    Tip ShapeRound
    Intermediate Pipe Diameter2.5 in (63.5 mm)
    Exhaust Tip Diameter3 in.
    Part FitmentDirect Fit
    Vendor Part Number817674
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    ITEM YOU MAY ALSO CONSIDER

    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!