Made in USA
818169 American Thunder Cat-Back Exhaust System Fits Select Ford F150 w/2.7L, 3.5L and 5.0L [For Factory Rear Dual Exit]
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-818169

818169 American Thunder Cat-Back Exhaust System Fits Select Ford F150 w/2.7L, 3.5L and 5.0L [For Factory Rear Dual Exit]

$1,04995
1 left in stock
ShippingShips on Sep 14, 2026
Lowest PriceLowest Price Guarantee

Ford
American Thunder Cat-Back Exhaust System
  • Fits Select Ford F-150 2.7L, 3.5L, 5.0L
  • 3 in. Tubing
  • 4.500 in. Black Ceramic Coated Tips
  • Dual Rear Exit
  • Super 40 Series Muffler
  • 409 Stainless Steel

    Flowmaster 818169 American Thunder Cat-Back Exhaust System Features:

    • Fits PowerBoost or standard gas trucks with a factory dual exhaust option
    • Max increases of up to 18 hp and 14 lb-ft of torque over the stock exhaust at the wheels
    • 3-inch mandrel bent 16-gauge 409 stainless steel tubing maximizes exhaust flow and improves durability
    • Large 4.50-inch Black Ceramic Coated Tips fill the bumper cut out better than the factory tip
    • Kit includes complete hardware and factory-styled hangers in the stock locations for an easy installation
    • Super 40 Series muffler delivers a deep, aggressive to moderate performance tone and improves exhaust flow
    • Lifetime Limited Warranty

    Emissions Note:

    This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • The Classic Sound of Flowmaster

      Flowmaster American Thunder Exhaust Systems for Truck/SUVs are ideal for the one looking for a moderate-to-aggressive exhaust tone, inside and out. The mufflers are tuned to deliver more power, torque, throttle response, and mileage. With easy fitment in mind, each system has mandrel-bent tubing for maximum performance and flow; and includes all necessary parts and hardware for installation.

    Part TypeExhaust System
    Product LineFlowmaster American Thunder Exhaust Systems for Truck/SUV
    BrandFLOWMASTER
    Package Height15.25
    Package Width16.25
    Package Length60.0
    Weight76.0 PG
    Tip Diameter4.5 in (114.3 mm)
    Muffler Inlet Inside Diameter3 in.
    Hangers IncludedYes
    Main Piping Diameter3 in.
    Tail Pipe QuantityDual
    Inlet TypeFlanged
    Inlet Size (In.)3
    Exhaust Tip Material304 Stainless Steel
    Catalytic Converter Quantity0
    Tip FinishBlack Ceramic
    Muffler Body Length10.25 in.
    Sound LevelAggressive / Moderate
    Muffler Body Material409 Stainless Steel
    Hanger IncludedYes
    Exhaust Tip CutAngled
    Gasket Or Seal IncludedNo
    Exhaust Tip IntercooledNo
    Pipe ColorSilver
    System FinishNatural
    Muffler Quantity1
    Muffler Inlet Outside Diameter3.13 in.
    Exhaust Pipe MaterialStainless Steel
    Tip MaterialStainless steel
    Muffler Flanged OutletNo
    Tip QuantityDual
    Exhaust Tip ResonatedNo
    Muffler Outlet LocationDual
    Exhaust TypeCat-Back
    Catalytic Converter IncludedNo
    Exhaust Tip WallSingle Wall
    Exhaust Tip Quantity2
    Muffler Inlet LocationCenter
    Exhaust Tip FinishBlack Ceramic Coating
    Exhaust Tip EdgeRolled Edge
    Valve IncludedNo
    Muffler TypeReflection
    Pipe Material409 Stainless Steel
    Muffler Body Width10 in.
    Tail Pipe Tapered OutletNo
    Exit PositionDual Rear
    Gauge16
    Muffler Body ShapeOval
    Mounting Bracket IncludedYes
    Muffler Outlet Quantity2
    Muffler FinishBlack High-Temperature Paint Finish
    Mount TypeUses factory hangers
    Clamps IncludedYes
    FinishNatural
    Exit StyleDual Out Rear
    Coating/FinishNatural
    Muffler Body Height4.50 in.
    Tip IncludedYes
    Clamping TypeFlat Band
    Muffler Flanged InletNo
    Pipe Diameter3 in (76.2 mm)
    Mandrel-BentYes
    Spring Bolt Kit IncludedNo
    Muffler SeriesSuper 40 Series
    Muffler IncludedYes
    Exhaust Tip ConnectionClamp-On
    System StyleCat-back
    Tail Pipe Outlet Outside Diameter3 in.
    Valve TypeNot Applicable
    Tip ShapeRound
    Exhaust Tip Diameter4.50 in.
    Vendor Part Number818169
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    123-Piece Tool Set with Carry Case

    JEGS

    123-Piece Tool Set with Carry Case

    Part Number : 555-80427
    $3999$51.99
    You Save$12.00
    2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

    JEGS

    2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

    Part Number : 555-80006
    $20999$269.99
    You Save$60.00
    6-Ton Jack Stands

    JEGS

    6-Ton Jack Stands

    Part Number : 555-80037
    $8099
    Wheel Chock [Solid Rubber]

    JEGS

    Wheel Chock [Solid Rubber]

    Part Number : 555-W41001
    $1299$14.99
    You Save$2.00
    20V 3/8" Drive Li-Ion Cordless Impact Wrench

    OEMTOOLS

    20V 3/8" Drive Li-Ion Cordless Impact Wrench

    Part Number : 693-24661
    $10995
    Deep Well Socket Set, 3/8 in. Drive [SAE 10-Piece, 12-Point]

    JEGS

    Deep Well Socket Set, 3/8 in. Drive [SAE 10-Piece, 12-Point]

    Part Number : 555-W38600
    $3699$40.99
    You Save$4.00
    5-Piece Pry Bar Set

    JEGS

    5-Piece Pry Bar Set

    Part Number : 555-80024
    $2669$28.99
    You Save$2.30
    Round Magnetic Parts Tray [5 1/2 in. Round]

    JEGS

    Round Magnetic Parts Tray [5 1/2 in. Round]

    Part Number : 555-80080
    $549$5.99
    You Save$0.50
    Large Tailpipe Expander 2-1/8" to 3-7/16"

    JEGS

    Large Tailpipe Expander 2-1/8" to 3-7/16"

    Part Number : 555-W80662
    $3999$43.99
    You Save$4.00
    69 Piece Magnetic Screwdriver Set

    JEGS

    69 Piece Magnetic Screwdriver Set

    Part Number : 555-80755
    $1999$28.09
    You Save$8.10
    Medium Tailpipe Expander 1-1/2" to 2-7/16"

    JEGS

    Medium Tailpipe Expander 1-1/2" to 2-7/16"

    Part Number : 555-W80661
    $3699$40.99
    You Save$4.00
    Exhaust Pipe Cutter

    JEGS

    Exhaust Pipe Cutter

    Part Number : 555-81393
    $3679$39.99
    You Save$3.20
    5 in. Deep Cut Portable Band Saw

    JEGS

    5 in. Deep Cut Portable Band Saw

    Part Number : 555-95722
    $10999$141.99
    You Save$32.00
    LED Drop Light with Built-In 120V Outlet

    JEGS

    LED Drop Light with Built-In 120V Outlet

    Part Number : 555-W2237
    $2899$31.99
    You Save$3.00
    60 LED Work Light

    JEGS

    60 LED Work Light

    Part Number : 555-81927
    $2569$31.99
    You Save$6.30
    Lo Boy Creeper 250 lb. Capacity

    JEGS

    Lo Boy Creeper 250 lb. Capacity

    Part Number : 555-81154
    $5999$65.99
    You Save$6.00
    Mechanic Chair & Step Stool on Wheels [300 lb. Capacity]

    JEGS

    Mechanic Chair & Step Stool on Wheels [300 lb. Capacity]

    Part Number : 555-81156
    $9099$111.99
    You Save$21.00
    Pit Mat 48 in. x 18 in. Unfolded

    JEGS

    Pit Mat 48 in. x 18 in. Unfolded

    Part Number : 555-80054
    $2299$32.39
    You Save$9.40
    Penetrating Oil [11 oz. Aerosol Can]

    LUCAS OIL

    Penetrating Oil [11 oz. Aerosol Can]

    Part Number : 639-11043
    $854$9.49
    You Save$0.95
    Brake and Parts Cleaner [14 oz. Aerosol Can]

    JEGS

    Brake and Parts Cleaner [14 oz. Aerosol Can]

    Part Number : 555-72312
    $679$7.99
    You Save$1.20
    Heavy-Duty Nitrile Gloves [7 mils Thick, Large]

    JEGS

    Heavy-Duty Nitrile Gloves [7 mils Thick, Large]

    Part Number : 555-1124
    $1799$19.99
    You Save$2.00
    Shop Towels Red

    JEGS

    Shop Towels Red

    Part Number : 555-80184
    $899$9.99
    You Save$1.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!