Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Pressure Plates
Pressure Plate10.5"
Fits: 1986-01 Mustang GT (with T-5 or T-45) 1993-98 Mustang Cobra (with T-5 or T-45) 2001-04 Mustang GT (with 3650)
Fits:
- HD diaphragm type with centrifugal assist. Has approx. 25% more capacity than stock Mustang unit. Cast iron plate.
- Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel. Metric fasteners and dowel pins must be used with 10.5" clutches.
- Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit 397-M-6397-A302.
Part TypeClutch Pressure Plate
BrandFORD PERFORMANCE
Package Height4.8
Package Width15.0
Package Length15.1
Weight20.85 PG
Part CategoryReplacement Parts
TypeDiaphragm
Disc Diameter (Mm)264
Pressure Plate StyleDiaphragm
Disc Diameter10.4 in (264.16 mm)
QuantitySold individually
Mounting Hardware IncludedNo
Counterweight AssistYes
Diameter10.4 in (264.16 mm)
Vendor Part NumberM-7563-B302
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
