![PRO550/600 V8 CDI Module and Coils Harness [Chevy/Chrysler]](https://www.jegs.com/images/mini_750/300/382/382-2002100142.jpg)
PRO550/600 V8 CDI Module and Coils Harness [Chevy/Chrysler]
Items You Need
Fueltech 2002100142 PRO550/PRO600 V8 FTSpark-8 Harness is an auxiliary plug-and-play harness to allow the addition of an FTSpark-8 CDI Module and CDI Racing Coils to the PRO550 or PRO600 V8 Harness when using the FuelTech FT600 ECU
FuelTech 2002100142 Harness:
- V8 engines with 1,3,5,7, left bank and 2,4,6,8, right bank cylinder numbering
- For use with FTSpark-8 and CDI Racing Coils
- Plug-and-play with the PRO600 V8 Harness
- Uses the "B" output (gray wires) on the PRO600 V8 Harness
- Single wire serial BUS connection only works with FuelTech ECUs FT450 and above
- (10)-Way connector for connection to ECU
- CPC firewall connector
- Power and ground ring terminals for battery connection
Note: Harness will require modifications and 7 additional output wires when used with other manufacturers ECUs
Wiring Harnesses for Popular Engine Combinations, Boost Control, and Data-Logging
FuelTech has the correct wiring harness from plug-and-play to unterminated to complete your FuelTech ECU-equipped project.

![Crimp Connector Kit [160 Pieces]](https://www.jegs.com/images/mini_200/500/555/555-10705.jpg)





![61-Piece Heat Shrink Tubing Kit [Black]](https://www.jegs.com/images/mini_200/500/555/555-10630.jpg)