FT Fuel Injector [520 lbs./hr.]
InfoVehicle Info Needed
FUELTECHPART NUMBER: 382-5010107881

FT Fuel Injector [520 lbs./hr.]

$37900
5 left in stock
ShippingShips on Nov 02, 2026
Lowest PriceLowest Price Guarantee

520 lbs./hr.
FT Fuel Injector
  • 520 lbs./hr. @ 90 psi. Fuel Pressure
  • 301 lbs./hr. @ 29 psi Fuel Pressure
  • 614 lbs./hr. @ 130 psi Fuel Pressure
  • Compatible with any ECU on the Market
  • Requires: 8 amp/2 amp Peak and Hold Injector Driver
  • Sold Individually

    FuelTech 5010107881 FT Fuel Injector:

    • Requires FuelTech 8 amp/2amp Fuel Injector Driver (Sold Seperately)
    • Compatible with any Fuel:
      • Gasoline
      • Methanol/Ethanol
      • Nitromethane
      • Nitropropane
      • Methyl Tertiary Butyl Ether (MTBE)
      • Ethyl Tertiary Butyl Ether (bio-ETBE)
    • Electrical Specifications:
      • Low Impedance
      • (1.5) ohms Coil Resistance
      • IP67/NEMA6 Protection Rating Against Dust, Water, and Contaminants

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • Injectors Compatible with any Fuel, from Gasoline to Nitromethane

      FuelTech fuel injectors are manufactured from high-quality, corrosion-resistant materials allowing them to work with whatever fuel you're using.

    Part TypeFuel Injector
    Product LineFuelTech Fuel Injectors
    BrandFUELTECH
    Package Height2.2
    Package Width3.7
    Package Length7.6
    Weight0.4 PG
    Part CategoryPerformance Parts
    Wiring Harness IncludedNo
    Overall Height3.4 in (86.4 mm)
    Tip Length0.51 in. (13 mm)
    Top O-Ring Diameter0.54 in. (13.7 mm)
    ColorRed/Black
    Injector Plug StyleEV1
    QuantitySold individually
    O-Rings IncludedYes
    Injector ImpedanceLow 1.5 ohms
    Driver Type8 amp/2 amp Peak and hold
    Bottom O-Ring Diameter0.54 in. (13.7 mm)
    Injector Advertised Flow Rate (Lbs./Hr.)520 lbs./hr
    Part FitmentSemi Universal
    Outside Diameter1.14 in. (29 mm)
    Vendor Part Number5010107881
    Package Qty1
    Package TypeEA

    Items You Need

    105-Piece Heat Seal Crimp Connector Kit

    JEGS

    105-Piece Heat Seal Crimp Connector Kit

    Part Number : 555-10700
    $5199$57.99
    You Save$6.00
    61-Piece Heat Shrink Tubing Kit [Black]

    JEGS

    61-Piece Heat Shrink Tubing Kit [Black]

    Part Number : 555-10630
    $2699$29.99
    You Save$3.00
    Dielectric Grease, 8 oz. Brush Top Bottle

    JEGS

    Dielectric Grease, 8 oz. Brush Top Bottle

    Part Number : 555-28021
    $1899$20.99
    You Save$2.00
    Fuel Injector Bungs Fits EV1, EV6 & EV14 Style Injectors

    JEGS

    Fuel Injector Bungs Fits EV1, EV6 & EV14 Style Injectors

    Part Number : 555-14715
    $5035$65.99
    You Save$15.64
    123-Piece Tool Set with Carry Case

    JEGS

    123-Piece Tool Set with Carry Case

    Part Number : 555-80427
    $3999$51.99
    You Save$12.00
    22-Piece SAE/Metric Combo Wrench Set

    JEGS

    22-Piece SAE/Metric Combo Wrench Set

    Part Number : 555-W1069
    $3999$43.99
    You Save$4.00
    Wire Crimping Pliers and Stripping Tool

    JEGS

    Wire Crimping Pliers and Stripping Tool

    Part Number : 555-W202
    $2099$23.99
    You Save$3.00
    Heavy Duty Scraper 12 in. L x 1 in. W

    JEGS

    Heavy Duty Scraper 12 in. L x 1 in. W

    Part Number : 555-W234C
    $799$8.99
    You Save$1.00
    Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]

    JEGS

    Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]

    Part Number : 555-81565
    $1999$33.99
    You Save$14.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!