![Blackheart Crossmember-Back Dual 2.500 in. Stainless Exhaust System for Select 1967-1974 Dodge, Plymouth Models [108 in. W/B]](https://www.jegs.com/images/mini_750/500/520/520-bh23111.jpg)
Product Discontinued
HOOKER HEADERSPART NUMBER: 520-BH23111
Blackheart Crossmember-Back Dual 2.500 in. Stainless Exhaust System for Select 1967-1974 Dodge, Plymouth Models [108 in. W/B]
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Mopar A-Body
Blackheart Crossmember-Back Dual Exhaust System1967-1974 Mopar Models w/108 in. W/B: 2.500 in. Stainless Tubing Built-In X-Pipe 304 Stainless Mufflers Dual Rear Exit
- Dodge Dart, Demon
- Plymouth Barracuda, Duster, Valiant
Blackheart BH23111 Crossmember-Back Dual Stainless Exhaust System Features:
- For vehicles with 108 in. wheelbase (W/B)
- 304 Stainless steel straight through absorption style mufflers have an aggressive to moderate sound
- Extended length X-pipe tubes for attaching to existing headers, catalytic converters, or manifolds
- 2.500 in. Mandrel-bent 304 stainless steel tubing
- Provides best-available ground clearance
- Compatible with OEM 1967-1974 Mopar or Hooker Blackheart Gen III Hemi swap transmission crossmembers
- Exits under the rear bumper
- Natural finish
Blackheart BH23111 Crossmember-Back Dual Stainless Exhaust System Notes:
- Fabrication may be required for connection to headers or manifolds
- Confirmed fit with a Gen III Hemi and transmissions: A727, NAG1, TKX (Chevy with RM-8079 bellhousing), 8HP70, 8HP90, TR-6060, and T56 magnum
Emissions: This product is engineered to facilitate the installation of a later model, emissions-friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply.
- If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
- The resulting vehicle is identical (with regard to all emissions-related parts, engine design parameters, and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
- The vehicle is an uncontrolled vehicle
- Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles
- Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
- An EO legal engine swap kit is utilized (such as a GM EROD)
- The vehicle is being used for Competition Use Only
- Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
Part TypeExhaust System
BrandHOOKER HEADERS
Package Height16.0
Package Width19.5
Package Length52.5
Weight61.0 PG
Part CategoryPerformance Parts
Muffler Material304 stainless steel
Clamp TypeBand
Inlet Size (In.)2.50
System FinishNatural
Muffler IncludedYes
Muffler Quantity2
System StyleCrossmember Back
Oxygen Sensor PortNo
Muffler ConfigurationOffset/Offset
System Material304 stainless steel
Exit LocationDual Rear
Exit QuantityDual
Clamps IncludedYes
Muffler StyleAbsorption
Exit StyleTurn Down
Vendor Part NumberBH23111
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations
![Ratcheting Cutter for Tubing and Exhaust Pipe [Cuts1 3/8 in.to 2 5/8 in. Dia. Tube]](https://www.jegs.com/images/mini_200/500/555/555-80696.jpg)



![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)
![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)



![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
![Cut-Off Wheels [3 in. Diameter, Set of 4]](https://www.jegs.com/images/mini_200/500/555/555-m580c.jpg)

