![Blackheart Gen III Hemi Engine Swap Header-Back Exhaust Kit for 1970-1974 Dodge Challenger, Plymouth Barracuda [2 1/2 in.]](https://www.jegs.com/images/mini_750/500/520/520-bh23114.jpg)
Blackheart Gen III Hemi Engine Swap Header-Back Exhaust Kit for 1970-1974 Dodge Challenger, Plymouth Barracuda [2 1/2 in.]
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Hooker Blackheart BH23114 Gen III Hemi Engine Swap Header-Back Exhaust Kit:
- Polished, rectangular quad exhaust tips fit into the slot in the bottom of the R/T style rear valence panel
- 2 1/2 in. mandrel-bent tubing increases exhaust flow
- Slip couplings allow head pipes to be dropped quickly for servicing the transmission
- High tuck design for increased ground clearance on lowered cars
- Utilizes original single or dual exhaust factory mounting points
Supporting Components for Hooker Blackheart BH23114 Required for Proper Fitment (Each Sold Separately)::
- Gen III Hemi Swap Long Tube Headers BH2358
- Gen III Hemi Engine Swap Mounting Brackets BHS566
- Gen III Hemi Engine Swap Crossmember BHS567
- Correct Transmission Crossmember Adapter Bracket for transmission being used
- GM style 2-bolt transmission mount such as JEGS 555-61820 or Hooker 71223029HKR or equivalent
- Installation of this exhaust system with any other combination of engine and transmission mounting components may cause interference with vehicle components and reduce ground clearance
Emissions: This product is engineered to facilitate the installation of a later model, emissions-friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:
- If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A
- The resulting vehicle is identical (with regard to all emissions-related parts, engine design parameters, and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
- The vehicle is an uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
- An EO legal engine swap kit is utilized (such as a GM EROD)
- The vehicle is being used for Competition Use Only
Exhaust Systems for Gen III Hemi Swaps
Hooker Blackheart Gen III Hemi Swap Exhaust Systems provide maximum performance and superior fitment for muscle cars and classic trucks.


![Ratcheting Cutter for Tubing and Exhaust Pipe [Cuts1 3/8 in.to 2 5/8 in. Dia. Tube]](https://www.jegs.com/images/mini_200/500/555/555-80696.jpg)



![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)
![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)



![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
![Cut-Off Wheels [3 in. Diameter, Set of 4]](https://www.jegs.com/images/mini_200/500/555/555-m580c.jpg)