Exhaust Cutout, Manual [2 1/2 in. O.D. Steel]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-30751

Exhaust Cutout, Manual [2 1/2 in. O.D. Steel]

$3999$43.99You Save$4.00
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Exhaust Cutouts
Exhaust Cutout
  • Manual
  • Fits Exhaust Systems with 2 1/2 in. I.D. Tube
  • 2 1/2 in. O.D.
  • 10 in. Length
  • 16-Gauge Steel
  • Includes:
    • 3-Bolt Header Flange
    • Gaskets
    • Hardware

      JEGS 555-30751 Manual Exhaust Cutout is the perfect exhaust product for Street/Strip Cars. They are a great add-on when you need to drive to the track quietly. Manual exhaust cutouts are very simple to install and let you unbolt the covers underneath your vehicle to open up your exhaust at the track. In a matter of minutes you are ready to go racing.

      JEGS 555-30751 Manual Exhaust Cutout Features:

      • Reduce vehicle elapsed times by 0.3 seconds at the track by removing the three wingnuts and opening up the exhaust
      • Can be bolted directly to headers or welded onto exhaust pipes for simple installation
      • Electric cutout valves and kits are available separately to open up your exhaust at the simple push of a button
      • 2 1/2 in. outside diameter and 10 in. in length to fit most applications
      • Uncap your exhaust at the track and then simply tighten the cap back down to make your vehicle quiet again for the ride home

      FAQ

      Do exhaust cutouts increase horsepower?

      • Yes, JEGS 555-30751 manual exhaust cutouts can increase horsepower by enhancing exhaust flow. These cutouts allow you to bypass the muffler, reducing back pressure and unlocking additional power for your vehicle.

      Are exhaust cutout valves illegal?

      • No, JEGS manual exhaust cutout valves, like the 555-30751, are legal in many areas. However, regulations vary, so it's essential to check local laws before installation to ensure compliance with noise and emissions regulations.

      Where do you put exhaust cutouts?

      • JEGS manual exhaust cutouts, such as the 555-30751, are typically installed in the exhaust system after the headers and before the mufflers. This placement allows you to control the exhaust flow and sound, giving you the flexibility to enjoy both performance and a quieter ride.

      What does an exhaust cutout valve do?

      • An exhaust cutout valve, like the one on the JEGS 555-30751 manual cutout, allows you to open or close a section of the exhaust system. By doing so, you can control the flow of exhaust gases, optimizing performance and altering the exhaust sound according to your preference.

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

  • Part TypeExhaust Cutout
    BrandJEGS
    Package Height4.7
    Package Width7.7
    Package Length11.4
    Weight4.25 PG
    Part CategoryPerformance Parts
    Hardware IncludedYes
    Exhaust Cutout MaterialSteel
    Tubing Diameter2.5 in (63.5 mm)
    Exhaust Cutout InstallationWeld-on
    Part FitmentUniversal
    Exhaust Cutout StyleManual
    Exhaust Cutout FinishNatural
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    JEGS

    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    Part Number : 555-30722
    $969$10.99
    You Save$1.30
    Replacement Block-Off Plate Fits 2-3/8" and 2-1/2"

    JEGS

    Replacement Block-Off Plate Fits 2-3/8" and 2-1/2"

    Part Number : 555-30754
    $3239$32.99
    You Save$0.60
    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    JEGS

    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    Part Number : 555-30802
    $1799$19.99
    You Save$2.00
    3 Inch Exhaust Butt Joint Clamp

    JEGS

    3 Inch Exhaust Butt Joint Clamp

    Part Number : 555-30853
    $1199$12.89
    You Save$0.90
    Band Clamp Diameter: 2-1/2"

    BORLA

    Band Clamp Diameter: 2-1/2"

    Part Number : 157-18004
    $3499

    ITEM YOU MAY ALSO CONSIDER

    Exhaust Cutout, Manual [2 1/2 in. O.D. Stainless Steel]

    JEGS

    Exhaust Cutout, Manual [2 1/2 in. O.D. Stainless Steel]

    Part Number : 555-30767
    $4699$51.99
    You Save$5.00
    Quick-EZE Cutout 2-1/2" Tube Diameter

    HEDMAN

    Quick-EZE Cutout 2-1/2" Tube Diameter

    Part Number : 500-16250
    $9499
    Stainless Steel Exhaust Cutout Outside Diameter: 2.5"

    MAGNAFLOW

    Stainless Steel Exhaust Cutout Outside Diameter: 2.5"

    Part Number : 642-10784
    $19400
    H1130 Exhaust Cut-Out Hook Up Kit

    PATRIOT EXHAUST

    H1130 Exhaust Cut-Out Hook Up Kit

    Part Number : 737-H1130
    $13338$148.21
    You Save$14.83
    Y-Pipe Exhaust Cut-Outs 2.5"

    DOUG'S HEADERS

    Y-Pipe Exhaust Cut-Outs 2.5"

    Part Number : 776-H1130
    $12888$143.20
    You Save$14.32
    Y-Pipe Exhaust Cut-Out 2.5"

    DOUG'S HEADERS

    Y-Pipe Exhaust Cut-Out 2.5"

    Part Number : 776-H1131
    $7159$79.55
    You Save$7.96
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!