JEGS 555-44100K1 Stinger RC Buggy Ready-to-Run Kit

Explore the path less traveled with the JEGS 44100K1 Ready-to-Run Stinger RC Buggy Kit. Designed for performance and personalization, the Stinger features a high-torque electric motor and fully-customizable control settings.

The Stinger uses front and rear independent suspension, coil-over shocks, and aggressive tire tread to outrun the competition in any terrain. This RC car is also designed with a sleek body and contrasting yellow and black paintwork. The rear wing adds stability while enhancing its overall look.

The included 2-cell lithium Big Block battery packs a punch and provides reliable long-lasting performance. A drained battery won't spoil your fun with the 20-Watt PROSTOCK charger.

JEGS Stinger RC Buggy Replacement Parts CLICK HERE

JEGS RC Batteries CLICK HERE

JEGS RC Battery Chargers CLICK HERE

JEGS RC Battery Charger Accessories CLICK HERE

JEGS 555-44100K1 Stinger RC Buggy Ready-to-Run Kit Includes:

• (1) JEGS Stinger RC Buggy 555-44100
• (1) JEGS Big Block LiPo 2S Battery [7.4V, 5000 mAh, 2-Cell] 555-45080
• (1) JEGS PROSTOCK Charger [20W Sport Balance] 555-45010

JEGS 555-44100K1 Stinger RC Buggy Ready-to-Run Kit Features:

• Dimensions
  • Overall: 16.200 in. L x 9.450 in. W x 5.150 in. H
  • Ground clearance: 1.730 in.
  • Battery tray dimensions: 5.500 in. L x 1.875 in. W x 1 in. H
• Wheels:
  • Front: 2.200 in. D x 1 in. W
  • Rear: 2.200 in. D x 1.500 in. W
• Weight: 3.700 lbs.
• Tires:
  • Front: Grooved (3.250 in. D x 1.062 in. W)
  • Rear: Knobby (3.375 in. D x 1.625 in. W)
• Servo
  • 6kg Servo
  •  Torque
    • 4.8V: 10.0 kg 138.8 oz./in.
    • 6V: 12.0 kg 166.7 oz./in.
  • Speed
    • 4.8V: 0.16 sec/60 degrees
    • 6V: 0.14 sec/60 degrees
• ESC (Electronic Speed Control)
  • Waterproof (With the exception of prolonged submergence)
  • Dustproof
  • Built-in capacitor
  • Programmable with jumpers
• Drivetrain
  • Rear mounted engine
  • Axle shafts: 5mm hardened steel
  • Gearbox:
    • Performance slipper system
    • Changeable gearing
    • High-efficiency design
    • Precision metal ball bearings
  • Bevel gear type differential
  • Sealed axle housings
  • Slipper clutch
• Chassis
  • Double wishbone suspension front and rear
  • Multiple shock mounting points to adjust suspension
  • Sealed compartment for the receiver
  • Philips screw hardware is used throughout
  • Quick-release velcro battery holder
  • 2 mounting posts to secure the body
  • Impact-resistant plastic composite
• Suspension
  • Shocks: (4) Oil-filled big-bore coil-overs (1 per corner)
    • Shock body: 10 mm OD
    • Shaft: Hardened polished steel (3 mm OD)
    • Performance Spring Rate
  • Axles: Independent front and rear
• Electronics
  • Servo: 12 kg
  • Electronic Safety Features
    • Over-heating prevention
    • Throttle signal loss protection
• Pistol-Grip Controller
  • Requires 4 AA Batteries Not Included 
  • Frequency: 2.4 GHz
  • Adjustments:
    • Security
      • Lock/unlock 
    • Steering
      • Servo reversal (Reverse steering control)
      • End-point (Increase or decrease maximum steering angle)
      • Digital trimming (Adjusts steering to a neutral position when not moving)
      • Dual-rate (On-the-fly adjustments)
    • Throttle
      • Throttle reverse (Reverse controls)
      • End-point (Increase or decrease maximum throttle input)
      • Braking (Increase or decrease braking force)
      • Digital trimming (Adjust the throttle in the neutral position when not moving)

PROSTOCK Charger Features

• Batteries
  • 2S-4S (2-4 Cell) LiPo, LiHV, & LiFe
  • 4-7 Cell NiMH, & NiCd
• Max power output: 20 Watt
• Charge rate: Up to 3 Amp
• Quick-connect charge and balance ports
• Battery Plugs
  • XT60 charge port
  • EC3 plug adapter
• Power source: 100-240V AC

Big Block LiPo 2C Battery Features

• Dimensions: 5.470 in. L x 1.850 in. W x 0.940 in. H
• Type: LiPo
• Cell Count: 2
• Volts: 7.4V
• Capacity: 5000 mAh
• C-Rate: 30C
• Continuous Discharge: 150A
• Max Burst Rate: 300A
• Max. Voltage: 8.4V
• Min. Voltage: 6V
• Wire: 12 AWG
• Plug Type: UNI 2.0
• Adapter plugs
  • Deans (Red)
  • EC3 (Blue)