JEGS 555-44200K4 Holeshot RC Stadium Truck Ready-to-Run Kit

Test your offroad RC skills with the JEGS 555-44200K4 Holeshot RC Stadium Truck Ready-to-Run Kit. This stadium truck focuses on performance and personalization using a high-torque electric motor and fully-customizable control settings.

Designed to win, the Holeshot's handling benefits from front and rear independent suspension, coil-over shocks, and aggressive tire tread. The orange and black paintwork with realistic lights, windows, and grill help it stand out from the crowd. The rear wing serves to increase traction and enhance the truck's design.

The included 7-cell Nickel-Metal Hydride (NiMH) 8.4-volt Small Block battery packs a punch and provides reliable long-lasting performance. A drained battery won't spoil your fun with the 60-Watt PROMOD charger.

Special Note:

• JEGS RC Vehicles come set up for a LiPo Battery. When upgrading to a NiMH Battery you will need to adjust the pin location on your motor to the NiMH Battery setting during installation or serious damage may occur to your unit. See the Illustration in the images above for the correct pin adjustment.

JEGS Holeshot RC Stadium Truck Replacement Parts CLICK HERE

JEGS RC Batteries CLICK HERE

JEGS RC Battery Chargers CLICK HERE

JEGS RC Battery Charger Accessories CLICK HERE

JEGS 555-44200K4 Holeshot RC Stadium Truck Ready-to-run Kit Includes:

• (1) JEGS Holeshot RC Stadium Truck 555-44200
• (1) JEGS Small Block NiMH Battery [8.4V, 3000 mAh, 7-Cell] 555-45050
• (1) JEGS PROMOD Charger [60W Rapid Balance] 555-45000

JEGS 555-44200K4 Holeshot RC Stadium Truck Ready-to-run Kit Features:

• Dimensions
  • Overall: 16.220 in. L x 12.590 in. W x 6.960 in. H
  • Ground clearance: 1.960 in.
  • Battery tray dimensions: 5.500 in. L x 1.875 in. W x 1 in. H
• Wheels:
  • Front: 2.200 in. D x 2 in. W
  • Rear: 2.200 in. D x 2 in. W
• Weight: 4.190 lbs.
• Tires:
  • Front: Grooved (3.250 in. D x 2.250 in. W)
  • Rear: Knobby (3.375 in. D x 2.250 in. W)
• Servo
  • 6kg Servo
  •  Torque
    • 4.8V: 10.0 kg 138.8 oz./in.
    • 6V: 12.0 kg 166.7 oz./in.
  • Speed
    • 4.8V: 0.16 sec/60 degrees
    • 6V: 0.14 sec/60 degrees
• ESC (Electronic Speed Control)
  • Waterproof (With the exception of prolonged submergence)
  • Dustproof
  • Built-in capacitor
  • Programmable with jumpers
• Drivetrain
  • Rear mounted engine
  • Axle shafts: 5mm hardened steel
  • Gearbox:
    • Performance slipper system
    • Changeable gearing
    • High-efficiency design
    • Precision metal ball bearings
  • Bevel gear type differential
  • Sealed axle housings
  • Slipper clutch
• Chassis
  • Double wishbone suspension front and rear
  • Multiple shock mounting points to adjust suspension
  • Sealed compartment for the receiver
  • Philips screw hardware is used throughout
  • Quick-release velcro battery holder
  • 2 mounting posts to secure the body
  • Impact-resistant plastic composite
• Suspension
  • Shocks: (4) Oil-filled big-bore coil-overs (1 per corner)
    • Shock body: 10 mm OD
    • Shaft: Hardened polished steel (3 mm OD)
    • Performance Spring Rate
  • Axles: Independent front and rear
• Electronics
  • Servo: 12 kg
  • Electronic Safety Features
    • Over-heating prevention
    • Throttle signal loss protection
• Pistol-Grip Controller
  • Requires 4 AA Batteries Not Included 
  • Frequency: 2.4 GHz
  • Adjustments:
    • Security
      • Lock/unlock 
    • Steering
      • Servo reversal (Reverse steering control)
      • End-point (Increase or decrease maximum steering angle)
      • Digital trimming (Adjusts steering to a neutral position when not moving)
      • Dual-rate (On-the-fly adjustments)
    • Throttle
      • Throttle reverse (Reverse controls)
      • End-point (Increase or decrease maximum throttle input)
      • Braking (Increase or decrease braking force)
      • Digital trimming (Adjust the throttle in the neutral position when not moving)

PROMOD Battery Charger Features

• Battery Compatibility 
  • 2S-4S (2-4 Cell) LiPo, Li-ion, LiHV, & LiFe
  • 6-8 Cell NiMH, & NiCd
  • 6-12 Volt Lead Acid
• On-board balance block to handle multi-cell batteries
• Charge rate: Up to 6 Amp
• Software safety features to prevent user error
• Battery Plugs
  • XT60 charge port
  • EC3 plug adapter
• Power source: 100-240V AC

Small Block NiMH 7C Battery Features

• Dimensions: 5.300 in. L x 1.830 in. W x 1 in. H
• Type: Nickel-Metal Hydride (NiMH)
• Cell Count: 7
• Volts: 8.4V
• Capacity: 3000 mAh
• C-Rate: 1C (30A)
• Max. Voltage: 8.4V
• Min. Voltage: 6V
• Wire: 12 AWG
• Plug Type: UNI 2.0
• Adapter plugs
  • Deans (Red)
  • EC3 (Blue)