Auxiliary Heater with Dual Vents [260 CFM, 28,000 BTU]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-70601

Auxiliary Heater with Dual Vents [260 CFM, 28,000 BTU]

$19799$241.99You Save$44.00
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Heater Hose Kit

JEGS

Heater Hose Kit

Part Number : 555-130246
$6699$71.99
You Save$5.00
Heater Hose Kit

JEGS

Heater Hose Kit

Part Number : 555-130248
$6699$71.99
You Save$5.00
Ratcheting Hose Cutter Rubber & Plastic hose

JEGS

Ratcheting Hose Cutter Rubber & Plastic hose

Part Number : 555-80589
$1499$16.99
You Save$2.00
Stainless Steel Hose Clamps 1/2 in. to 7/8 in. OD

JEGS

Stainless Steel Hose Clamps 1/2 in. to 7/8 in. OD

Part Number : 555-16051
$599$7.99
You Save$2.00

28,000 BTU Auxiliary Heaters
Auxiliary Heater
  • 260 cfm
  • 28,000 btu
  • 3-Speed Mountable Switch
  • Dual 3 in. O.D. Front Vents
  • 6.500 in. H x 9.500 in. W x 8.625 in. D
  • 3-Speed Blower 12 V
  • 5/8 in. Heater Hose Connections

    JEGS 555-70601 Auxiliary Heater with Dual Vents Includes:

    • (1) Heater assembly
    • (1) Grille plate with dual 3 in. O.D. vents
    • (8) Grille plate attaching screws, #8 x 3/4 in. stainless steel Philips pan head
    • (1) Switch assembly includes:
      • (1) 3-Speed switch
      • (1) Switch face plate
      • (2) Switch attaching nuts
      • (1) Switch knob
      • (3) 14-gauge female spade terminals
      • (1) Dash mounting bracket
    • (1) 5 ft. 3-wire 14-gauge wiring harness with plug-in connector for heater motor
    • (2) Mounting Brackets
    • (8) Mounting Bracket Bolts, 1/4 in.-20 x 3/4 in. UHL stainless steel with 3/8 in. hex washer head
    • (4) #14 x 1/2 in. stainless steel truss Philips head screws
    • Installation instructions

    JEGS 555-70601 Auxiliary Heater with Dual Vents Features:

    • Keep warm with 28,000 BTUs of heat
    • Compact design for limited space and tight areas
    • Long life three-speed motor
    • Heavy-duty injection-molded and glass-filled nylon construction
    • Durable tube and fin core design
    • Universal mounting design
    • 3 in. O.D. Dual Vents
    • Heavy-duty injection molded glass-filled nylon housing construction
    • Long-life 12-volt three-speed motor
      • Low [4.9 Amps]
      • Med [6.6 Amps]
      • High [9.6 Amps]
    • Compact design
    • Durable tube/fin heater core design
    • 5/8 in. O.D. heater core inlet and outlet connections
    • Requires external ground

    JEGS 555-70601 Auxiliary Heater Notes:

    • The heater electrical circuit must be fused for safety, with the fuse placed as close to the vehicle's electrical connection as possible. We recommend JEGS fuse holder 555-10516
    • The heater requires a 15 amp fuse.
    • A separate ground wire must be utilized to complete the electrical circuit.

    FAQ

    What is auxiliary heating in a car?

    • Auxiliary heating is an add-on heating system that warms the vehicle's interior when a factory heater does not exist or additional heating is required.
    • It enhances comfort, especially during colder seasons or chilly mornings.
    • JEGS offers many different auxiliary heater models to meet your heating needs. 
    • The Perfect Compact Heater for Hot Rods

      JEGS Hot Rod Heaters will keep you warm on those cold days, simply connect plumbing and wiring directly to your cooling system for immediate heat. The blower unit blows fresh air through the heat exchanger, elevating the air temperature, which then exits through the outlet louvers adding strong and consistent heat to any vehicle. You can even use these auxiliary heaters as an economical alternative to replacing a worn-out or hard-to-reach heater core. Heaters are available in a variety of sizes and styles with multiple speeds and adjustable settings. Defroster and Louver/Vent kits are available separately.

      Show More

    Part TypeAuxiliary Heater
    Product LineJEGS Hot Rod Heaters
    BrandJEGS
    Package Height8.4
    Package Width10.2
    Package Length17.9
    Weight9.8 PG
    Part CategoryAccessories
    Heater Output (Btus)28,000
    Heater Height6.5 in (165.1 mm)
    Mounting Hardware IncludedYes
    Heater StyleDual Front Vent
    Heater Flow (Cfm)260
    Uses Engine Coolant For HeatYes
    Heater FinishBlack
    Fan Speed3-speed
    Heater Depth8.625 in (219.075 mm)
    Heater Core Outlet Size.625 in O.D. (15.88 mm)
    Heater MaterialNylon
    Heater Type12-volt Universal
    Heater Core Inlet Size.625 in O.D. (15.88 mm)
    Heater Width9.5 in (241.3 mm)
    Part FitmentUniversal
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    EASY KITS

    Auxiliary Heater and Duct Kit [260 CFM, 28,000 BTU]

    JEGS

    Auxiliary Heater and Duct Kit [260 CFM, 28,000 BTU]

    Part Number : 555-70601K
    $35197
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning