![Front Fender with Lower Extension for 1969 Chevrolet Camaro RS [Left/Driver Side]](https://www.jegs.com/images/mini_750/500/555/555-78669.jpg)
Front Fender with Lower Extension for 1969 Chevrolet Camaro RS [Left/Driver Side]
JEGS 78669 Reproduction left front fender with lower extension for 1969 Chevrolet Camaro RS is produced using high-quality stamped steel and is an excellent bolt-on replacement for your damaged or rusted factory original.
Includes:
Special Note: Before packaging by our team of professionals, each in-stock sheet metal panel sold and shipped by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damaged and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
![Polyester Paint Brush Set [5-piece]](https://www.jegs.com/images/mini_200/500/555/555-20195.jpg)


![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)
![Seam Sealer White [1-Quart Can]](https://www.jegs.com/images/mini_200/500/555/555-72334.jpg)
![Automotive Sandpaper Discs [400 Grit]](https://www.jegs.com/images/mini_200/500/555/555-73010.jpg)


![Air Tool Holder [Holds 9 Tools]](https://www.jegs.com/images/mini_200/500/555/555-80382.jpg)


