Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![Front Fender for 1967 Mustang [Right/Passenger Side]](https://www.jegs.com/images/mini_750/500/555/555-92344.jpg)
Vehicle Info NeededFront Fender for 1967 Mustang [Right/Passenger Side]
Ships Today
Lowest Price GuaranteeItems You Need
![Front Fender for 1967 Mustang [Left/Driver Side]](https://www.jegs.com/images/mini_200/500/555/555-92343.jpg)
JEGS
Part Number : 555-92343
DUPLICOLOR
Part Number : 318-BSP400
![Auto Body Repair Kit [7-Piece Set]](https://www.jegs.com/images/mini_200/500/555/555-8007.jpg)
![Air Compressor [3 HP, 110 Volt, Single Phase, 60-Gallon Tank]](https://www.jegs.com/images/mini_200/500/555/555-81850.jpg)
![Air Accessory Set [22-piece]](https://www.jegs.com/images/mini_200/500/555/555-m523.jpg)
![Air Oil & Water Separator [4 1/2 in. Height x 1 3/4 in. Diameter]](https://www.jegs.com/images/mini_200/500/555/555-52205.jpg)
![Seam Sealer White [1-Quart Can]](https://www.jegs.com/images/mini_200/500/555/555-72334.jpg)
![Polyester Paint Brush Set [5-piece]](https://www.jegs.com/images/mini_200/500/555/555-20195.jpg)
![Dead Blow Hammer Set [3-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81754.jpg)
![Rolling Scissor Work Stand [500 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81442.jpg)
![Plier Set [5-Piece]](https://www.jegs.com/images/mini_200/500/555/555-w1717.jpg)
![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
JEGS 555-92344 Front Fender Features:
- JEGS reproduction right front fender for 1967 Ford Mustang
- Produced using high-quality stamped steel
- Coated with a black EDP (Electro Deposit Primer) finish to protect against rust and corrosion
- An excellent bolt-on replacement for your damaged or rusted factory original
JEGS 555-92344 Front Fender Note:
- Replaces Ford Part Number C7ZZ-16005A
Special Note: Before packaging by our team of professionals, each in-stock sheet metal panel sold and shipped by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damaged and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
Factory Fitment Replacement Fenders For Ford Classic Cars
JEGS reproduction Ford fenders are constructed from heavy-duty steel and designed to match the original factory fitment and function. An electro-deposit primer (EDP) coating protects each fender; while adding a layer of corrosion resistance before priming and painting. JEGS offers all the parts you need to bring your concours restoration, resto-mod, or ground-up restoration project to completion.
ITEM YOU MAY ALSO CONSIDER
OER
Part Number : 691-16005CR
