The JEGS 555-97001 front inner fenderwell is a direct-fit replacement panel for 1967-1972 Chevrolet and GMC fullsize trucks and Suburban, 1969-1972 Chevrolet Blazer, and 1970-1972 GMC Jimmy. It is deep draw stamped from 20-gauge (1mm) steel on a 50-ton press, so the contours, mounting flanges, and hole locations follow the original panel and give the front fender, splash shield, and core support solid mounting surfaces during rust repair or a full front end restoration.

JEGS 555-97001 Left 1967-1972 GM Truck Front Inner Fenderwell Features:

• Fits 1967-1972 Chevrolet and GMC fullsize trucks and Suburban
• Fits 1969-1972 Chevrolet Blazer
• Fits 1970-1972 GMC Jimmy
• Mounts on the left/driver side of the vehicle
• Deep draw stamped from 20-gauge (1mm) steel on a 50-ton press
• Reproduces the original panel contours, flanges, and mounting hole locations
• Silver EDP (electro-deposit primer) coated finish resists corrosion in storage and before paint
• Installs in place of the original inner fenderwell for a direct replacement

JEGS 555-97001 Left 1967-1972 GM Truck Front Inner Fenderwell Notes:

• Order JEGS 555-97002 for the right/passenger inner fenderwell to replace both sides
• Test fit the panel and check body alignment before final installation
• Scuff and prime the EDP coating before applying topcoat or undercoating

Special Note: Before packaging by our team of professionals, each in-stock sheet metal panel sold and shipped by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damaged and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP (electro-deposit primer) coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.